[Sat Nov 26 12:35:14 2011] Detection parameters:
  Position = (284.2, 291.2) = 6 58 20.51 -55 56 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2770.4 +/- 66.1
  Background counts = 134.2
  Rate = 0.07 +/- 0.002

[Sat Nov 26 12:35:17 2011] Off-axis axis estimate = 1.16'
[Sat Nov 26 16:20:04 2011] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 16:20:04 2011] Initial guess for spatial extent in simple fitting = 7.01"
[Sat Nov 26 16:20:04 2011] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.841
[Sat Nov 26 16:20:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.01"
[Sat Nov 26 18:46:53 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 18:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 18:46:53 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 18:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 18:46:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 18:46:54 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 18:46:54 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 18:46:54 2011] Fit fullrun_mos2_xmm0112980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 18:47:37 2011] Spatial fit model total counts = 7616.110000, observed total counts = 7609.000000
[Sat Nov 26 18:47:37 2011] Offset between fit and detection position for source 1 = 0.487179 pixels
[Sat Nov 26 18:47:37 2011] 7454.300000 total counts/ 5090.380000 bgd. counts: snr = 33.132764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.487179 pixels
  Position = (284.3, 291.7) = 6 58 20.44 -55 56 28.1
  Extent = 10.6 (10.1-11.1)", rotation angle = 0
  Source counts = 2363.9 +/- 86.3
  Background counts = 5090.4
  Rate = 0.06 +/- 0.002
[Sat Nov 26 18:47:37 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 18:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 18:47:37 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 18:47:37 2011] Source does appear to be extended
[Sat Nov 26 18:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 22:05:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:05:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 22:05:35 2011] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Nov 26 22:05:35 2011] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.892
[Sat Nov 26 22:05:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.65"
[Sun Nov 27 01:00:57 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Nov 27 01:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1.csv
[Sun Nov 27 01:00:57 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Nov 27 01:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1.csv
[Sun Nov 27 01:00:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 01:00:58 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Nov 27 01:00:58 2011] fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Nov 27 01:00:58 2011] Fit fullrun_mos2_xmm0112980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Nov 27 01:01:41 2011] Spatial fit model total counts = 10462.500000, observed total counts = 10457.000000
[Sun Nov 27 01:01:41 2011] Offset between fit and detection position for source 1 = 0.067310 pixels
[Sun Nov 27 01:01:41 2011] 9972.180000 total counts/ 7335.350000 bgd. counts: snr = 30.787308
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.067310 pixels
  Position = (284.3, 291.8) = 6 58 20.44 -55 56 27.8
  Extent = 11.4 (10.9-12.1)", rotation angle = 0
  Source counts = 2636.8 +/- 99.9
  Background counts = 7335.4
  Rate = 0.06 +/- 0.002
[Sun Nov 27 01:01:41 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 01:01:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 01:01:41 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 01:01:41 2011] Source does appear to be extended
[Sun Nov 27 01:01:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 12:28:44 2011] Counts = 2636.830000, rescaling region sizes by 2.000000
[Sun Nov 27 12:28:44 2011] XMMSAS src. selection expression = ellipse(24686.111200, 25334.424400, 1364.736039, 1364.736039, 0.000000, X, Y)
[Sun Nov 27 12:28:44 2011] Writing source region out to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_src.reg
[Sun Nov 27 12:28:44 2011] Extracting stamp from image fullrun_mos2_xmm0112980201_pi300-10000_cl_sm2.00.img.gz, (206, 213) - (363, 370)
[Sun Nov 27 12:28:44 2011] XMMSAS bgd. selection expression = annulus(24686.111200, 25334.424400, 4549.120131, 9098.240262, X, Y) && !ellipse(22923.693000, 25500.392600, 1229.976035, 1229.976035, 0.000000, X, Y) && !ellipse(22876.663200, 24177.246600, 590.856817, 590.856817, 0.000000, X, Y) && !ellipse(24025.810883, 24538.321808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33852.894577, 33223.886872, 638.398419, 414.438091, 217.075628, X, Y) && !ellipse(29791.819884, 22420.686400, 411.504812, 313.145609, 307.358146, X, Y) && !ellipse(21906.322000, 24031.468000, 1379.912040, 1379.912040, 0.000000, X, Y) && !ellipse(24060.658142, 26927.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.204987, 19639.195374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21217.270000, 24798.670400, 1364.928039, 1364.928039, 0.000000, X, Y) && !ellipse(15904.738693, 33098.946045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28275.485800, 32993.162560, 601.823217, 345.492810, 338.647916, X, Y) && !ellipse(22051.886000, 26288.980000, 2575.680074, 2183.336063, 90.000000, X, Y) && !ellipse(20832.058000, 24721.246000, 1242.984036, 1242.984036, 0.000000, X, Y) && !ellipse(18574.528000, 20223.374400, 1622.800047, 1622.800047, 0.000000, X, Y) && !ellipse(20797.844000, 22880.038000, 1379.912040, 1379.912040, 0.000000, X, Y) && !ellipse(23191.848320, 26145.900000, 2152.216062, 2152.216062, 0.000000, X, Y) && !ellipse(21227.170000, 23005.824000, 2114.288061, 717.185621, 260.669000, X, Y) && !ellipse(21986.916977, 27168.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23758.011353, 27705.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25786.183040, 21874.721800, 474.592014, 474.592014, 0.000000, X, Y) && !ellipse(20108.746000, 24622.340600, 1393.432040, 1393.432040, 0.000000, X, Y) && !ellipse(22227.378998, 22583.309570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22364.399750, 28190.957123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21439.902000, 27216.980000, 1287.840037, 1287.840037, 0.000000, X, Y) && !ellipse(21860.744675, 15971.871109, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Nov 27 12:28:44 2011] Writing fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1.gif
[Sun Nov 27 12:29:03 2011] Mean detx,y = (-486.27, -1467.52) 
[Sun Nov 27 12:29:07 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 12:36:49 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 12:36:49 2011] Setting source spectrum file to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 12:36:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 17:35:04 2011] Updating aperture counts using extracted products
[Sun Nov 27 17:35:04 2011] Error reading totcts from fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 17:35:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 17:35:07 2011] Using photon index=1.80, rate=0.063, arf fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 17:35:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 17:35:07 2011] Updating source flux to 5.5e-13
[Sun Nov 27 17:45:33 2011] Reading fit data from xmm0112980201/analysis//spectral/fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 17:45:33 2011] Spectral fit parameter nH value = 8.22813e+20
[Sun Nov 27 17:45:33 2011] Spectral fit parameter PhoIndex value = 1.67338
[Sun Nov 27 17:45:33 2011] Failed to get F(0.3-8.0) from xmm0112980201/analysis//spectral/fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 17:45:33 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 17:45:33 2011] Using Nh = 8.2e+20, photon index=1.67, rate=0.063, arf fullrun_mos2_xmm0112980201_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 17:45:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 17:45:33 2011] Updating source flux to 6.4e-13