[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (308.2, 305.1) = 16 35 55.62 66 12 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1459.5 +/- 49.1
  Background counts = 55.1
  Rate = 0.1 +/- 0.004

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 0.85'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 6.86"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 15 02:28:52 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 7149.430000, observed total counts = 7145.000000
[Fri Jun 15 05:17:51 2012] Offset between fit and detection position for source 6 = 1.009508 pixels
[Fri Jun 15 05:17:51 2012] 7425.203000 total counts/ 7235.470000 bgd. counts: snr = 2.230537
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.009508 pixels
  Position = (307.9, 304.1) = 16 35 55.86 66 12 4.7
  Extent = 7.2 (5.0-12.7)", rotation angle = 0
  Source counts = 189.7 +/- 86.2
  Background counts = 7235.5
  Rate = 0.01 +/- 0.006
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:18:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Fri Jun 15 05:18:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.18"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 15 06:33:18 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 15 07:57:43 2012] Spatial fit model total counts = 6626.030000, observed total counts = 6630.000000
[Fri Jun 15 07:57:43 2012] Offset between fit and detection position for source 6 = 0.028237 pixels
[Fri Jun 15 07:57:43 2012] 6909.401000 total counts/ 6759.280000 bgd. counts: snr = 1.825960
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.028237 pixels
  Position = (307.8, 304.1) = 16 35 55.87 66 12 4.5
  Extent = 6.0 (3.9-14.4)", rotation angle = 0
  Source counts = 150.1 +/- 83.1
  Background counts = 6759.3
  Rate = 0.01 +/- 0.006
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(26733.738800, 26406.635400, 361.623010, 361.623010, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (287, 283) - (329, 325)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(26733.738800, 26406.635400, 602.705017, 1205.410035, X, Y) && !ellipse(27721.794000, 28453.392000, 1286.216037, 408.772012, 0.000000, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(24523.416600, 28300.282000, 1244.472036, 1244.472036, 0.000000, X, Y) && !ellipse(25408.988220, 28480.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25316.578000, 24819.534000, 1071.928031, 1071.928031, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6.gif
[Fri Jun 15 08:04:35 2012] Mean detx,y = (-507.35, 685.78) 
[Fri Jun 15 08:04:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:04:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:04:45 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 15 08:04:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 15 15:33:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:30 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src6.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 2.9e-14