[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (297.0, 291.1) = 16 36 3.65 66 11 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.2 +/- 19.2
  Background counts = 47.7
  Rate = 0.01 +/- 0.002

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 0.54'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 6.70"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47.csv
[Fri Jun 15 02:28:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:53 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Jun 15 02:28:53 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jun 15 02:28:53 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Jun 15 05:17:51 2012] Source 47 is offset by -4.584618 and -7.063483 pixels which is larger than
2 X fitted extent = 6.160506 x 6.160506, not incorporating fit results
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:18:14 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Fri Jun 15 05:18:14 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 6.70"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun 15 06:33:19 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jun 15 07:57:43 2012] Spatial fit model total counts = 1705.840000, observed total counts = 1704.000000
[Fri Jun 15 07:57:43 2012] Offset between fit and detection position for source 47 = 7.582953 pixels
[Fri Jun 15 07:57:43 2012] 1826.731000 total counts/ 1663.040000 bgd. counts: snr = 4.013964
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 7.582953 pixels
  Position = (291.6, 285.8) = 16 36 7.57 66 10 45.2
  Extent = 13.4 (13.4-26.8)", rotation angle = 0
  Source counts = 163.7 +/- 42.7
  Background counts = 1663.0
  Rate = 0.01 +/- 0.003
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(25316.578000, 24819.534000, 803.946023, 803.946023, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (245, 240) - (338, 332)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(25316.578000, 24819.534000, 1339.910039, 2679.820077, X, Y) && !ellipse(27721.794000, 28453.392000, 1286.216037, 408.772012, 0.000000, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(24523.416600, 28300.282000, 1244.472036, 1244.472036, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.046234, 27446.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.784973, 27103.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.320068, 26679.409119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.812927, 26150.628174, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47.gif
[Fri Jun 15 08:12:33 2012] Mean detx,y = (-1151.68, 2632.03) 
[Fri Jun 15 08:12:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:12:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:12:49 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 15 08:12:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:31 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.0111, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src47.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 3.1e-14
[Fri Jun 15 15:34:52 2012] Flag b found in src. 47 procflags, skipping spectral fitting