[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (277.3, 312.1) = 16 36 17.80 66 12 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 15.9
  Background counts = 41.5
  Rate = 0.009 +/- 0.001

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 1.82'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.34"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Jun 15 02:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 15 02:28:53 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Jun 15 02:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 15 02:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 132.088000, observed total counts = 621.000000
[Fri Jun 15 05:17:51 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 05:17:51 2012] Warning, spatial fit 34 centroid is now closest to src. 41
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:17:51 2012] Source is confused with source 32
[Fri Jun 15 05:18:14 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Jun 15 05:18:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.34"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 15 06:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:57:43 2012] Warning, spatial fit 22 centroid is now closest to src. 41
[Fri Jun 15 07:57:43 2012] Spatial fit model total counts = 1389.520000, observed total counts = 1118.000000
[Fri Jun 15 07:57:43 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 07:57:43 2012] Source 34 is offset by 5.642747 and 3.493656 pixels which is larger than
2 X fitted extent = 1.542777 x 1.542777, not incorporating fit results
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(24079.784973, 27103.704041, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (240, 275) - (315, 350)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(24079.784973, 27103.704041, 1087.500000, 2175.000000, X, Y) && !ellipse(22514.926636, 29906.830872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(26503.261200, 28918.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.416600, 28300.282000, 1244.472036, 1244.472036, 0.000000, X, Y) && !ellipse(25408.988220, 28480.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.046234, 27446.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.320068, 26679.409119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.812927, 26150.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21670.519400, 25444.087400, 343.085610, 343.085610, 0.000000, X, Y) && !ellipse(25316.578000, 24819.534000, 1071.928031, 1071.928031, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34.gif
[Fri Jun 15 08:10:07 2012] Mean detx,y = (-3126.51, 1081.41) 
[Fri Jun 15 08:10:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:10:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:10:21 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Jun 15 08:10:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Jun 15 12:30:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 12:30:55 2012] rmf not generated due to insufficient counts
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:31 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.00941, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src34.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 2.9e-14
[Fri Jun 15 15:34:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting