[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (342.0, 330.3) = 16 35 31.30 66 14 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 13.5
  Background counts = 46.5
  Rate = 0.005 +/- 0.001

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 3.91'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.848
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.38"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jun 15 02:28:52 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 812.913000, observed total counts = 750.000000
[Fri Jun 15 05:17:51 2012] Offset between fit and detection position for source 26 = 7.363200 pixels
[Fri Jun 15 05:17:51 2012] 722.395000 total counts/ 517.249000 bgd. counts: snr = 9.020139
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.363200 pixels
  Position = (346.6, 336.1) = 16 35 27.97 66 14 23.4
  Extent = 16.8 (16.2-33.5)", rotation angle = 0
  Source counts = 205.1 +/- 26.9
  Background counts = 517.2
  Rate = 0.01 +/- 0.002
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:18:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 16.77"
[Fri Jun 15 05:18:14 2012] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.949
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 16.77"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 15 06:33:19 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun 15 07:57:43 2012] Warning, spatial fit 17 centroid is now closest to src. 3
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:57:43 2012] Source is confused with source 3
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(30105.470000, 29188.206000, 1006.176029, 1006.176029, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (289, 278) - (404, 394)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(30105.470000, 29188.206000, 1676.960048, 3353.920097, X, Y) && !ellipse(27721.794000, 28453.392000, 1286.216037, 408.772012, 0.000000, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(27681.374695, 29440.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.274628, 28987.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.261200, 28918.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29532.291199, 27622.810059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.949646, 26577.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29544.806000, 26179.232000, 1250.960036, 1250.960036, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26.gif
[Fri Jun 15 08:08:52 2012] Mean detx,y = (1475.91, -3064.20) 
[Fri Jun 15 08:08:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:09:07 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:09:07 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 15 08:09:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun 15 15:33:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:30 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src26.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 3.8e-14
[Fri Jun 15 15:34:52 2012] Flag c found in src. 26 procflags, skipping spectral fitting