[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (292.6, 327.9) = 16 36 6.82 66 13 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.2 +/- 15.0
  Background counts = 46.2
  Rate = 0.009 +/- 0.001

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 2.18'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.906
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.52"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 15 02:28:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:51 2012] Source 25 is offset by -4.700641 and 4.170324 pixels which is larger than
2 X fitted extent = 1.280759 x 1.280759, not incorporating fit results
[Fri Jun 15 05:17:51 2012] Warning, spatial fit 25 centroid is now closest to src. 23
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:17:51 2012] Source is confused with source 29
[Fri Jun 15 05:18:14 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Jun 15 05:18:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.906
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.52"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Jun 15 06:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:57:43 2012] Source 25 is offset by -5.301308 and -3.010457 pixels which is larger than
2 X fitted extent = 0.885485 x 0.885485, not incorporating fit results
[Fri Jun 15 07:57:43 2012] Warning, spatial fit 16 centroid is now closest to src. 29
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(25408.988220, 28480.910217, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (255, 290) - (330, 365)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(25408.988220, 28480.910217, 1087.500000, 2175.000000, X, Y) && !ellipse(22514.926636, 29906.830872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27721.794000, 28453.392000, 1286.216037, 408.772012, 0.000000, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(27681.374695, 29440.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.274628, 28987.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.261200, 28918.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.416600, 28300.282000, 1244.472036, 1244.472036, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.046234, 27446.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.784973, 27103.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.320068, 26679.409119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.812927, 26150.628174, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25.gif
[Fri Jun 15 08:08:26 2012] Mean detx,y = (-2584.69, -521.56) 
[Fri Jun 15 08:08:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:08:47 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:08:47 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 15 08:08:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jun 15 12:22:09 2012] Not generating rmf since there are only 92 counts
[Fri Jun 15 12:22:09 2012] rmf not generated due to insufficient counts
[Fri Jun 15 15:33:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:30 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.00913, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src25.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 3.3e-14
[Fri Jun 15 15:34:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting