[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (282.3, 332.0) = 16 36 14.24 66 14 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.0 +/- 17.2
  Background counts = 41.2
  Rate = 0.02 +/- 0.002

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 2.70'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.669
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.78"
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 15 02:28:51 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 15 02:28:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 890.631000, observed total counts = 645.000000
[Fri Jun 15 05:17:51 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 05:17:51 2012] Source 23 is offset by -1.994192 and -4.731088 pixels which is larger than
2 X fitted extent = 0.963770 x 0.963770, not incorporating fit results
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 975.048000, observed total counts = 783.000000
[Fri Jun 15 05:17:51 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:18:14 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Jun 15 05:18:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.669
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.78"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 15 06:33:18 2012] Fit fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jun 15 06:33:19 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 15 06:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jun 15 06:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:57:43 2012] Spatial fit model total counts = 620.165000, observed total counts = 645.000000
[Fri Jun 15 07:57:43 2012] Offset between fit and detection position for source 23 = 6.132629 pixels
[Fri Jun 15 07:57:43 2012] 816.508000 total counts/ 152.384000 bgd. counts: snr = 53.799655
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 6.132629 pixels
  Position = (282.4, 325.8) = 16 36 14.14 66 13 39.2
  Extent = 15.6 (15.6-31.1)" x 15.6 (15.6-31.1)", rotation angle = 0 (360-0) degrees
  Source counts = 664.1 +/- 28.6
  Background counts = 152.4
  Rate = 0.04 +/- 0.002
[Fri Jun 15 07:57:43 2012] Source 23 is offset by -2.649832 and -4.924092 pixels which is larger than
2 X fitted extent = 4.706069 x 1.625361, not incorporating fit results
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Fri Jun 15 07:57:43 2012] Source is confused with source 25
[Fri Jun 15 07:57:43 2012] Source is confused with source 29
[Fri Jun 15 07:57:43 2012] Source is confused with source 32
[Fri Jun 15 07:57:58 2012] XMMSAS src. selection expression = ellipse(24523.416600, 28300.282000, 933.354027, 933.354027, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 15 07:57:58 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (229, 272) - (336, 379)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(24523.416600, 28300.282000, 1555.590045, 3111.180090, X, Y) && !ellipse(22514.926636, 29906.830872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27721.794000, 28453.392000, 1286.216037, 408.772012, 0.000000, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(27681.374695, 29440.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.274628, 28987.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.261200, 28918.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.988220, 28480.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.046234, 27446.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.784973, 27103.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.320068, 26679.409119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.812927, 26150.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21670.519400, 25444.087400, 343.085610, 343.085610, 0.000000, X, Y) && !ellipse(25316.578000, 24819.534000, 1071.928031, 1071.928031, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23.gif
[Fri Jun 15 08:07:27 2012] Mean detx,y = (-3114.09, -104.55) 
[Fri Jun 15 08:07:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:07:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:07:50 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 15 08:07:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 15 15:33:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:30 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.0449, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src23.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 1.3e-13
[Fri Jun 15 15:34:52 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Fri Jun 15 15:34:52 2012] Flag p found in src. 23 procflags, skipping spectral fitting
[Fri Jun 15 15:34:52 2012] Flag c found in src. 23 procflags, skipping spectral fitting