[Fri Jun 15 00:23:35 2012] Detection parameters:
  Position = (320.3, 326.2) = 16 35 46.92 66 13 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 559.1 +/- 30.4
  Background counts = 53.5
  Rate = 0.05 +/- 0.003

[Fri Jun 15 00:23:36 2012] Off-axis axis estimate = 2.56'
[Fri Jun 15 00:25:17 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 00:25:17 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jun 15 00:25:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.872
[Fri Jun 15 00:25:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.71"
[Fri Jun 15 02:28:50 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 15 02:28:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 02:28:50 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 15 02:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 15 02:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 02:28:52 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 15 02:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 15 02:28:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 4664.380000, observed total counts = 2661.000000
[Fri Jun 15 05:17:51 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 05:17:51 2012] Source 2 is offset by -5.419960 and -1.089439 pixels which is larger than
2 X fitted extent = 0.788023 x 0.788023, not incorporating fit results
[Fri Jun 15 05:17:51 2012] Spatial fit model total counts = 1474.540000, observed total counts = 1432.000000
[Fri Jun 15 05:17:51 2012] Offset between fit and detection position for source 2 = 1.761032 pixels
[Fri Jun 15 05:17:51 2012] Warning, changing simple spatial fit ID from 2 to 20
[Fri Jun 15 05:17:51 2012] 1410.155000 total counts/ 1296.860000 bgd. counts: snr = 3.146040
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.761032 pixels
  Position = (319.2, 327.6) = 16 35 47.69 66 13 46.8
  Extent = 16.1 (9.7-32.2)" x 5.1 (2.6-9.9)", rotation angle = 0 (358-0) degrees
  Source counts = 113.3 +/- 37.6
  Background counts = 1296.9
  Rate = 0.008 +/- 0.003
[Fri Jun 15 05:17:51 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:51 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 05:17:51 2012] Source does appear to be extended
[Fri Jun 15 05:17:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Fri Jun 15 05:17:51 2012] Source is confused with source 20
[Fri Jun 15 05:17:51 2012] Source is confused with source 22
[Fri Jun 15 05:18:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:18:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 05:18:14 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jun 15 05:18:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.987
[Fri Jun 15 05:18:14 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.59"
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 06:33:18 2012] fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 15 06:33:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 15 06:33:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:57:43 2012] Warning, spatial fit 2 centroid is now closest to src. 20
[Fri Jun 15 07:57:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:43 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:43 2012] Source does appear to be extended
[Fri Jun 15 07:57:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Fri Jun 15 07:57:57 2012] XMMSAS src. selection expression = ellipse(27721.794000, 28453.392000, 964.662028, 306.579009, 0.000000, X, Y)
[Fri Jun 15 07:57:57 2012] Writing source region out to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 07:57:57 2012] Extracting stamp from image fullrun_pn_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (264, 272) - (375, 383)
[Fri Jun 15 07:57:58 2012] XMMSAS bgd. selection expression = annulus(27721.794000, 28453.392000, 1607.770046, 3215.540093, X, Y) && !ellipse(29240.232000, 28264.042000, 2683.136077, 2683.136077, 0.000000, X, Y) && !ellipse(25613.390961, 26840.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27459.715520, 27154.220600, 1161.672033, 1161.672033, 0.000000, X, Y) && !ellipse(26733.738800, 26406.635400, 482.164014, 482.164014, 0.000000, X, Y) && !ellipse(27681.374695, 29440.185577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.274628, 28987.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.261200, 28918.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24523.416600, 28300.282000, 1244.472036, 1244.472036, 0.000000, X, Y) && !ellipse(25408.988220, 28480.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30105.470000, 29188.206000, 1341.568039, 1341.568039, 0.000000, X, Y) && !ellipse(25199.063019, 28067.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29532.291199, 27622.810059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.046234, 27446.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.784973, 27103.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.949646, 26577.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.320068, 26679.409119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29544.806000, 26179.232000, 1250.960036, 1250.960036, 0.000000, X, Y) && !ellipse(25173.123383, 25805.949615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.812927, 26150.628174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25316.578000, 24819.534000, 1071.928031, 1071.928031, 0.000000, X, Y)
[Fri Jun 15 07:57:58 2012] Writing fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 07:58:33 2012] Mean detx,y = (-385.58, -1569.56) 
[Fri Jun 15 07:58:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 07:59:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 07:59:01 2012] Setting source spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 07:59:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 15 15:33:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:30 2012] Error reading totcts from fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.00766, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 2.4e-14
[Fri Jun 15 15:34:52 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Fri Jun 15 15:34:52 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri Jun 15 15:34:52 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jun 15 15:35:49 2012] Reading fit data from xmm0112980101/analysis//spectral/fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun 15 15:35:49 2012] Spectral fit parameter nH value = 8.23482e+20
[Fri Jun 15 15:35:49 2012] Spectral fit parameter PhoIndex value = 1.87148
[Fri Jun 15 15:35:49 2012] Failed to get F(0.3-8.0) from xmm0112980101/analysis//spectral/fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 15:35:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:35:49 2012] Using Nh = 8.2e+20, photon index=1.87, rate=0.00766, arf fullrun_pn_xmm0112980101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 15:35:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:35:49 2012] Updating source flux to 2.8e-14