[Fri Jun 15 00:24:14 2012] Detection parameters:
  Position = (451.2, 390.0) = 16 34 12.40 66 18 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.1 +/- 23.2
  Background counts = 4.7
  Rate = 0.02 +/- 0.001

[Fri Jun 15 00:24:15 2012] Off-axis axis estimate = 12.91'
[Fri Jun 15 03:47:46 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 03:47:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 03:47:46 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Fri Jun 15 03:47:46 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.876
[Fri Jun 15 03:47:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.88"
[Fri Jun 15 05:17:37 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 05:17:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 05:17:37 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 05:17:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 05:17:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 05:17:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 05:17:38 2012] Fit fullrun_mos2_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 05:18:05 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.922488 pixels away
[Fri Jun 15 05:18:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:18:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:18:05 2012] Assessing source extent using major
[Fri Jun 15 05:18:05 2012] Source does appear to be extended
[Fri Jun 15 05:18:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:10:51 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 07:10:51 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Fri Jun 15 07:10:51 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.876
[Fri Jun 15 07:10:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.88"
[Fri Jun 15 07:57:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 07:57:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 07:57:38 2012] Fit fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 15 07:57:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 07:57:38 2012] fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 07:57:38 2012] Fit fullrun_mos2_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 07:57:50 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.911812 pixels away
[Fri Jun 15 07:57:50 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:50 2012] Assessing source extent using major
[Fri Jun 15 07:57:50 2012] Source does appear to be extended
[Fri Jun 15 07:57:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 15:04:14 2012] XMMSAS src. selection expression = ellipse(39205.125793, 33880.071594, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 15:04:14 2012] Writing source region out to fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 15:04:14 2012] Extracting stamp from image fullrun_mos2_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (414, 352) - (489, 427)
[Fri Jun 15 15:04:14 2012] XMMSAS bgd. selection expression = annulus(39205.125793, 33880.071594, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 15:04:14 2012] Writing fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 15:04:41 2012] Mean detx,y = (-7630.58, 11057.01) 
[Fri Jun 15 15:04:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 15:04:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 15:04:52 2012] Setting source spectrum file to fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 15:04:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 15:19:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 15:19:20 2012] rmf not generated due to insufficient counts
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:32 2012] Error reading totcts from fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 15:33:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:32 2012] Using photon index=1.80, rate=0.0204, arf fullrun_mos2_xmm0112980101_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 15:33:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:32 2012] Updating source flux to 4.6e-13
[Fri Jun 15 15:34:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting