[Fri Jun 15 00:23:55 2012] Detection parameters:
  Position = (342.4, 325.9) = 16 35 30.99 66 13 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.0 +/- 10.8
  Background counts = 19.9
  Rate = 0.003 +/- 0.0006

[Fri Jun 15 00:23:56 2012] Off-axis axis estimate = 3.76'
[Fri Jun 15 02:28:53 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 02:28:53 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Fri Jun 15 02:28:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Fri Jun 15 02:28:53 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.31"
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 15 03:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 15 03:47:45 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Jun 15 05:17:57 2012] Spatial fit model total counts = 373.974000, observed total counts = 368.000000
[Fri Jun 15 05:17:57 2012] Offset between fit and detection position for source 30 = 0.458093 pixels
[Fri Jun 15 05:17:57 2012] 337.290900 total counts/ 317.888000 bgd. counts: snr = 1.088252
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.458093 pixels
  Position = (342.4, 326.4) = 16 35 30.98 66 13 41.3
  Extent = 4.5 (2.1-9.1)", rotation angle = 0
  Source counts = 19.4 +/- 18.4
  Background counts = 317.9
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability