[Fri Jun 15 00:23:55 2012] Detection parameters:
  Position = (451.3, 390.2) = 16 34 12.28 66 18 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.2 +/- 22.7
  Background counts = 5.9
  Rate = 0.02 +/- 0.001

[Fri Jun 15 00:23:56 2012] Off-axis axis estimate = 12.93'
[Fri Jun 15 02:28:53 2012] Using EEF radius (= 12.89 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 02:28:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 02:28:53 2012] Initial guess for spatial extent in simple fitting = 12.89"
[Fri Jun 15 02:28:53 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.021
[Fri Jun 15 02:28:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.89"
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 03:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 03:47:45 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 05:17:57 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.937431 pixels away
[Fri Jun 15 05:17:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:57 2012] Assessing source extent using major
[Fri Jun 15 05:17:57 2012] Source does appear to be extended
[Fri Jun 15 05:17:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 06:33:19 2012] Using EEF radius (= 12.89 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:33:19 2012] Initial guess for spatial extent in simple fitting = 12.89"
[Fri Jun 15 06:33:19 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.021
[Fri Jun 15 06:33:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.89"
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 07:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 07:10:51 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 07:57:46 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.937431 pixels away
[Fri Jun 15 07:57:46 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:46 2012] Assessing source extent using major
[Fri Jun 15 07:57:46 2012] Source does appear to be extended
[Fri Jun 15 07:57:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 12:51:20 2012] XMMSAS src. selection expression = ellipse(39218.865570, 33896.490295, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing source region out to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 12:51:20 2012] Extracting stamp from image fullrun_mos1_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (414, 353) - (489, 428)
[Fri Jun 15 12:51:20 2012] XMMSAS bgd. selection expression = annulus(39218.865570, 33896.490295, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 13:02:45 2012] Mean detx,y = (11276.81, 7522.11) 
[Fri Jun 15 13:02:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:03:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:03:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 13:03:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 14:46:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 14:46:45 2012] rmf not generated due to insufficient counts
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:31 2012] Error reading totcts from fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.0197, arf fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 3.9e-13
[Fri Jun 15 15:33:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting