[Fri Jun 15 00:23:55 2012] Detection parameters:
  Position = (295.0, 329.8) = 16 36 5.13 66 14 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 12.6
  Background counts = 19.9
  Rate = 0.004 +/- 0.0008

[Fri Jun 15 00:23:56 2012] Off-axis axis estimate = 2.29'
[Fri Jun 15 02:28:53 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 02:28:53 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Fri Jun 15 02:28:53 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Fri Jun 15 02:28:53 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.57"
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 15 03:47:45 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 15 03:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:17:57 2012] Source 27 is offset by -0.080201 and -1.137085 pixels which is larger than
2 X fitted extent = 1.063554 x 0.871039, not incorporating fit results
[Fri Jun 15 05:17:57 2012] Warning, spatial fit 23 centroid is now closest to src. 38
[Fri Jun 15 05:17:57 2012] Source 27 is offset by -0.741282 and 3.390062 pixels which is larger than
2 X fitted extent = 0.883067 x 0.883067, not incorporating fit results
[Fri Jun 15 05:17:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:57 2012] Assessing source extent using major
[Fri Jun 15 05:17:57 2012] Source does appear to be extended
[Fri Jun 15 05:17:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:17:57 2012] Source is confused with source 10
[Fri Jun 15 06:33:19 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:33:19 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Fri Jun 15 06:33:19 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Fri Jun 15 06:33:19 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.57"
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 07:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jun 15 07:10:51 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jun 15 07:57:46 2012] Spatial fit model total counts = 605.772000, observed total counts = 603.000000
[Fri Jun 15 07:57:46 2012] Offset between fit and detection position for source 27 = 9.573079 pixels
[Fri Jun 15 07:57:46 2012] 583.114900 total counts/ 523.521000 bgd. counts: snr = 2.604562
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 9.573079 pixels
  Position = (288.0, 336.4) = 16 36 10.12 66 14 25.3
  Extent = 15.1 (15.1-15.1)", rotation angle = 0
  Source counts = 59.6 +/- 24.1
  Background counts = 523.5
  Rate = 0.003 +/- 0.001
[Fri Jun 15 07:57:46 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:46 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:46 2012] Source does appear to be extended
[Fri Jun 15 07:57:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 12:51:20 2012] XMMSAS src. selection expression = ellipse(25010.618000, 29222.478000, 907.590026, 907.590026, 0.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing source region out to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27_src.reg
[Fri Jun 15 12:51:20 2012] Extracting stamp from image fullrun_mos1_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (236, 284) - (340, 389)
[Fri Jun 15 12:51:20 2012] XMMSAS bgd. selection expression = annulus(25010.618000, 29222.478000, 1512.650044, 3025.300087, X, Y) && !ellipse(27221.115400, 27135.286600, 2289.856066, 2289.856066, 0.000000, X, Y) && !ellipse(26775.410000, 26577.611400, 1114.168032, 1114.168032, 0.000000, X, Y) && !ellipse(27955.880000, 28291.424000, 1279.600037, 1279.600037, 0.000000, X, Y) && !ellipse(24770.974060, 27020.317535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.205475, 28656.466064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.452576, 25973.126190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.010956, 29136.325439, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27.gif
[Fri Jun 15 13:05:04 2012] Mean detx,y = (1124.28, -3510.88) 
[Fri Jun 15 13:05:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:05:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:05:17 2012] Setting source spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jun 15 13:05:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Jun 15 15:03:56 2012] Not generating rmf since there are only 59 counts
[Fri Jun 15 15:03:56 2012] rmf not generated due to insufficient counts
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:31 2012] Error reading totcts from fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.00328, arf fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src27.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 3.4e-14
[Fri Jun 15 15:33:33 2012] Flag b found in src. 27 procflags, skipping spectral fitting
[Fri Jun 15 15:33:33 2012] Flag c found in src. 27 procflags, skipping spectral fitting
[Fri Jun 15 15:33:33 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting