[Fri Jun 15 00:23:55 2012] Detection parameters:
  Position = (313.2, 312.0) = 16 35 52.00 66 12 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 883.2 +/- 37.3
  Background counts = 23.3
  Rate = 0.05 +/- 0.002

[Fri Jun 15 00:23:56 2012] Off-axis axis estimate = 1.45'
[Fri Jun 15 02:28:53 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 02:28:53 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Fri Jun 15 02:28:53 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Fri Jun 15 02:28:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.16"
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 03:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 03:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 03:47:45 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 03:47:45 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 05:17:57 2012] Spatial fit model total counts = 3614.270000, observed total counts = 3607.000000
[Fri Jun 15 05:17:57 2012] Offset between fit and detection position for source 1 = 2.017883 pixels
[Fri Jun 15 05:17:57 2012] 3582.509000 total counts/ 3051.680000 bgd. counts: snr = 9.609154
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.017883 pixels
  Position = (314.6, 313.4) = 16 35 50.98 66 12 45.2
  Extent = 14.3 (14.0-28.6)", rotation angle = 0
  Source counts = 530.8 +/- 59.9
  Background counts = 3051.7
  Rate = 0.03 +/- 0.003
[Fri Jun 15 05:17:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 05:17:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 05:17:57 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 05:17:57 2012] Source does appear to be extended
[Fri Jun 15 05:17:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 05:17:57 2012] Source is confused with source 2
[Fri Jun 15 05:17:57 2012] Source is confused with source 9
[Fri Jun 15 06:33:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:33:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 06:33:19 2012] Initial guess for spatial extent in simple fitting = 14.31"
[Fri Jun 15 06:33:19 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.853
[Fri Jun 15 06:33:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.31"
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 07:10:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 07:10:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 07:10:51 2012] fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 07:10:51 2012] Fit fullrun_mos1_xmm0112980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 07:57:46 2012] Spatial fit model total counts = 7225.440000, observed total counts = 7215.000000
[Fri Jun 15 07:57:46 2012] Offset between fit and detection position for source 1 = 1.542531 pixels
[Fri Jun 15 07:57:46 2012] 7192.900000 total counts/ 4141.670000 bgd. counts: snr = 47.411883
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.542531 pixels
  Position = (313.4, 312.5) = 16 35 51.84 66 12 41.0
  Extent = 28.6 (28.6-57.2)", rotation angle = 0
  Source counts = 3051.2 +/- 84.8
  Background counts = 4141.7
  Rate = 0.2 +/- 0.005
[Fri Jun 15 07:57:46 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:57:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:57:46 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:57:46 2012] Source does appear to be extended
[Fri Jun 15 07:57:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 12:51:20 2012] Counts = 3051.230000, rescaling region sizes by 2.000000
[Fri Jun 15 12:51:20 2012] XMMSAS src. selection expression = ellipse(27221.115400, 27135.286600, 3434.784099, 3434.784099, 0.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing source region out to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 12:51:20 2012] Extracting stamp from image fullrun_mos1_xmm0112980101_pi300-10000_cl_sm2.00.img.gz, (116, 115) - (511, 510)
[Fri Jun 15 12:51:20 2012] XMMSAS bgd. selection expression = annulus(27221.115400, 27135.286600, 11449.280329, 22898.560659, X, Y) && !ellipse(26775.410000, 26577.611400, 1114.168032, 1114.168032, 0.000000, X, Y) && !ellipse(39218.865570, 33896.490295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29439.574000, 26243.990000, 1232.976035, 1232.976035, 0.000000, X, Y) && !ellipse(33442.957400, 12082.070600, 582.346417, 582.346417, 0.000000, X, Y) && !ellipse(27955.880000, 28291.424000, 1279.600037, 1279.600037, 0.000000, X, Y) && !ellipse(24770.974060, 27020.317535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.205475, 28656.466064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.452576, 25973.126190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.010956, 29136.325439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25010.618000, 29222.478000, 1210.120035, 1210.120035, 0.000000, X, Y)
[Fri Jun 15 12:51:20 2012] Writing fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 12:51:24 2012] Mean detx,y = (99.60, -700.36) 
[Fri Jun 15 12:51:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 13:02:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 13:02:29 2012] Setting source spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 13:02:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 15:33:31 2012] Updating aperture counts using extracted products
[Fri Jun 15 15:33:31 2012] Error reading totcts from fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 15:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:33:31 2012] Using photon index=1.80, rate=0.168, arf fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 15:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:33:31 2012] Updating source flux to 1.4e-12
[Fri Jun 15 15:33:33 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jun 15 15:34:14 2012] Reading fit data from xmm0112980101/analysis//spectral/fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 15:34:14 2012] Spectral fit parameter nH value = 6.12954e+20
[Fri Jun 15 15:34:14 2012] Spectral fit parameter PhoIndex value = 1.76122
[Fri Jun 15 15:34:14 2012] Failed to get F(0.3-8.0) from xmm0112980101/analysis//spectral/fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 15:34:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 15:34:14 2012] Using Nh = 6.1e+20, photon index=1.76, rate=0.168, arf fullrun_mos1_xmm0112980101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 15:34:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 15:34:14 2012] Updating source flux to 1.5e-12