[Tue Aug 7 10:28:02 2012] Detection parameters: Position = (301.0, 321.0) = 17 45 43.46 -29 0 13.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2582.5 +/- 67.6 Background counts = 199.0 Rate = 0.1 +/- 0.004 [Tue Aug 7 10:28:03 2012] Off-axis axis estimate = 1.65' [Tue Aug 7 10:32:15 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 10:32:15 2012] Initial guess for spatial extent in simple fitting = 7.25" [Tue Aug 7 10:32:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852 [Tue Aug 7 10:32:15 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.25" [Tue Aug 7 14:53:14 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17.ximg exists [Tue Aug 7 14:53:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17.csv [Tue Aug 7 14:53:14 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17_1.ximg exists [Tue Aug 7 14:53:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17.csv [Tue Aug 7 14:53:14 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 14:53:16 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Tue Aug 7 14:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue Aug 7 14:53:16 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Tue Aug 7 14:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17.csv [Tue Aug 7 14:53:16 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 18:27:34 2012] Warning, spatial fit 17 centroid is now closest to src. 16 [Tue Aug 7 18:27:35 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 18:27:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 18:27:35 2012] Assessing source extent using major [Tue Aug 7 18:27:35 2012] Source does appear to be extended [Tue Aug 7 18:27:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 18:28:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 18:28:16 2012] Initial guess for spatial extent in simple fitting = 7.25" [Tue Aug 7 18:28:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852 [Tue Aug 7 18:28:16 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.25" [Tue Aug 7 21:26:02 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16.ximg exists [Tue Aug 7 21:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16.csv [Tue Aug 7 21:26:02 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16_1.ximg exists [Tue Aug 7 21:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16.csv [Tue Aug 7 21:26:02 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 21:26:03 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Tue Aug 7 21:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16.csv [Tue Aug 7 21:26:03 2012] fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Tue Aug 7 21:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16.csv [Tue Aug 7 21:26:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 00:12:17 2012] Source 18 is offset by -5.647587 and -5.786985 pixels which is larger than 2 X fitted extent = 1.723949 x 1.723949, not incorporating fit results [Wed Aug 8 00:12:17 2012] Source 18 is offset by -6.680920 and 2.754624 pixels which is larger than 2 X fitted extent = 2.622667 x 2.622667, not incorporating fit results [Wed Aug 8 00:12:17 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 00:12:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 00:12:17 2012] Assessing source extent using major [Wed Aug 8 00:12:17 2012] Source does appear to be extended [Wed Aug 8 00:12:17 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 00:12:40 2012] Counts = 2582.531250, rescaling region sizes by 2.000000 [Wed Aug 8 00:12:40 2012] XMMSAS src. selection expression = ellipse(26137.453918, 27880.260284, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Aug 8 00:12:40 2012] Writing source region out to fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18_src.reg [Wed Aug 8 00:12:40 2012] Extracting stamp from image fullrun_pn_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (226, 246) - (376, 396) [Wed Aug 8 00:12:40 2012] XMMSAS bgd. selection expression = annulus(26137.453918, 27880.260284, 4350.000000, 8700.000000, X, Y) && !ellipse(16652.401581, 35871.701996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25579.643400, 29943.796600, 515.808015, 515.808015, 0.000000, X, Y) && !ellipse(25518.548004, 29348.905670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.583984, 29039.308014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.395599, 29068.269073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26957.680000, 28990.896000, 890.584026, 890.584026, 0.000000, X, Y) && !ellipse(25786.159027, 28952.841675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27118.521759, 26590.316956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.773860, 27626.575400, 878.480025, 878.480025, 0.000000, X, Y) && !ellipse(27516.508000, 26100.236000, 721.825621, 721.825621, 0.000000, X, Y) && !ellipse(22061.762760, 19232.119600, 343.725610, 343.725610, 0.000000, X, Y) && !ellipse(29631.323145, 19665.745418, 482.080591, 333.639249, 346.701702, X, Y) && !ellipse(26918.671220, 22767.112000, 508.817615, 508.817615, 0.000000, X, Y) && !ellipse(25971.783880, 22217.155400, 376.337611, 376.337611, 0.000000, X, Y) && !ellipse(26416.444000, 36859.571200, 1758.552051, 1758.552051, 0.000000, X, Y) && !ellipse(30238.048431, 36618.593597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28021.871582, 32181.726349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.277710, 31564.044403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21530.331589, 31696.631256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.289612, 18748.889709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26569.286600, 30565.430000, 1207.448035, 1207.448035, 0.000000, X, Y) && !ellipse(23797.311096, 18842.584366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.766602, 29706.129242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29705.117676, 29441.306000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28643.371460, 27960.585541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29262.492432, 27793.316040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30762.517609, 27562.631165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28237.305969, 26590.906372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16612.099564, 25480.050079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.158800, 25143.146000, 1007.680029, 1007.680029, 0.000000, X, Y) && !ellipse(25445.996674, 24313.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.191162, 24491.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22352.250336, 24231.875671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.690000, 23780.518000, 1291.304037, 1291.304037, 0.000000, X, Y) && !ellipse(29894.179657, 23271.254211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23560.198395, 23329.925049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.480652, 20407.757324, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 00:12:40 2012] Writing fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18.gif [Wed Aug 8 00:20:40 2012] Mean detx,y = (-571.53, -389.06) [Wed Aug 8 00:20:44 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 8 00:23:34 2012] Binned source spectrum to 10 counts/bin [Wed Aug 8 00:23:34 2012] Setting source spectrum file to fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Wed Aug 8 00:23:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18_bgd.pi.gz [Wed Aug 8 01:09:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Aug 8 01:09:26 2012] rmf not generated due to insufficient counts [Wed Aug 8 08:01:21 2012] Updating aperture counts using extracted products [Wed Aug 8 08:01:21 2012] Error reading totcts from fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Wed Aug 8 08:01:24 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 8 08:01:24 2012] Using photon index=1.80, rate=0.142, arf fullrun_pn_xmm0112972101_pi300-10000_pass1_cl_src18.arf [Wed Aug 8 08:01:24 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 8 08:01:24 2012] Updating source flux to 3.4e-13 [Wed Aug 8 08:09:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting