[Tue Aug  7 10:29:11 2012] Detection parameters:
  Position = (278.0, 287.4) = 17 45 51.09 -29 2 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 16.0
  Background counts = 74.7
  Rate = 0.003 +/- 0.0007

[Tue Aug  7 10:29:11 2012] Off-axis axis estimate = 1.69'
[Tue Aug  7 16:42:14 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 16:42:14 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Aug  7 16:42:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Tue Aug  7 16:42:14 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.27"
[Tue Aug  7 18:27:10 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39.ximg exists
[Tue Aug  7 18:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39.csv
[Tue Aug  7 18:27:10 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Aug  7 18:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39.csv
[Tue Aug  7 18:27:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 18:27:11 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Aug  7 18:27:11 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Aug  7 18:27:11 2012] Fit fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Aug  7 18:27:58 2012] Source 36 is offset by 6.689853 and 6.046817 pixels which is larger than
2 X fitted extent = 0.835756 x 0.835756, not incorporating fit results
[Tue Aug  7 18:27:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 18:27:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 18:27:58 2012] Assessing source extent using major
[Tue Aug  7 18:27:58 2012] Source does appear to be extended
[Tue Aug  7 18:27:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 22:58:02 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 22:58:02 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Aug  7 22:58:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Tue Aug  7 22:58:02 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.27"
[Wed Aug  8 00:12:04 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Aug  8 00:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28.csv
[Wed Aug  8 00:12:04 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Aug  8 00:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28.csv
[Wed Aug  8 00:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:12:05 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Aug  8 00:12:05 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Aug  8 00:12:05 2012] Fit fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Aug  8 00:12:28 2012] Spatial fit model total counts = 953.996000, observed total counts = 954.000000
[Wed Aug  8 00:12:28 2012] Offset between fit and detection position for source 36 = 2.664243 pixels
[Wed Aug  8 00:12:28 2012] 970.435000 total counts/ 809.890000 bgd. counts: snr = 5.641359
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.664243 pixels
  Position = (275.6, 288.5) = 17 45 51.88 -29 2 35.9
  Extent = 14.5 (14.4-14.5)", rotation angle = 0
  Source counts = 160.5 +/- 31.2
  Background counts = 809.9
  Rate = 0.006 +/- 0.001
[Wed Aug  8 00:12:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:12:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:12:28 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:12:28 2012] Source does appear to be extended
[Wed Aug  8 00:12:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 06:50:37 2012] XMMSAS src. selection expression = ellipse(23929.296000, 25053.078400, 869.670025, 869.670025, 0.000000, X, Y)
[Wed Aug  8 06:50:37 2012] Writing source region out to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36_src.reg
[Wed Aug  8 06:50:37 2012] Extracting stamp from image fullrun_mos2_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (226, 239) - (326, 339)
[Wed Aug  8 06:50:37 2012] XMMSAS bgd. selection expression = annulus(23929.296000, 25053.078400, 1449.450042, 2898.900083, X, Y) && !ellipse(27001.459160, 27628.572600, 824.400024, 824.400024, 0.000000, X, Y) && !ellipse(26620.780000, 27671.360000, 1165.696034, 1165.696034, 0.000000, X, Y) && !ellipse(25771.148000, 27873.632000, 1179.296034, 1179.296034, 0.000000, X, Y) && !ellipse(25332.276459, 28474.867371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25213.583374, 28064.673309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.997800, 22208.902200, 306.526409, 306.526409, 0.000000, X, Y) && !ellipse(28750.362000, 28830.162000, 2477.840071, 2477.840071, 0.000000, X, Y) && !ellipse(26908.641800, 22802.772000, 580.099217, 580.099217, 0.000000, X, Y) && !ellipse(26974.735992, 26155.593079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.285370, 26255.334564, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 06:50:37 2012] Writing fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36.gif
[Wed Aug  8 07:03:49 2012] Mean detx,y = (3137.31, -2449.27) 
[Wed Aug  8 07:03:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 07:04:01 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 07:04:01 2012] Setting source spectrum file to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Aug  8 07:04:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Aug  8 08:01:26 2012] Updating aperture counts using extracted products
[Wed Aug  8 08:01:26 2012] Error reading totcts from fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Aug  8 08:01:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 08:01:26 2012] Using photon index=1.80, rate=0.00635, arf fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src36.arf
[Wed Aug  8 08:01:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 08:01:26 2012] Updating source flux to 6.4e-14
[Wed Aug  8 08:07:23 2012] Flag b found in src. 36 procflags, skipping spectral fitting