[Tue Aug  7 10:29:11 2012] Detection parameters:
  Position = (321.7, 315.1) = 17 45 36.61 -29 0 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.6 +/- 24.9
  Background counts = 93.2
  Rate = 0.01 +/- 0.001

[Tue Aug  7 10:29:11 2012] Off-axis axis estimate = 2.07'
[Tue Aug  7 16:42:14 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 16:42:14 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Aug  7 16:42:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.611
[Tue Aug  7 16:42:14 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.46"
[Tue Aug  7 18:27:10 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Aug  7 18:27:10 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Aug  7 18:27:10 2012] Fit fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_src7 appears to have run properly
[Tue Aug  7 18:27:11 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Aug  7 18:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Aug  7 18:27:11 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Aug  7 18:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Aug  7 18:27:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 18:27:58 2012] Warning, spatial fit 7 centroid is now closest to src. 29
[Tue Aug  7 18:27:58 2012] Spatial fit model total counts = 1572.250000, observed total counts = 1278.000000
[Tue Aug  7 18:27:58 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 18:27:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 18:27:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 18:27:58 2012] Assessing source extent using major
[Tue Aug  7 18:27:58 2012] Source does appear to be extended
[Tue Aug  7 18:27:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 22:58:02 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 22:58:02 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Aug  7 22:58:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.611
[Tue Aug  7 22:58:02 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.46"
[Wed Aug  8 00:12:03 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug  8 00:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7.csv
[Wed Aug  8 00:12:03 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug  8 00:12:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7.csv
[Wed Aug  8 00:12:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:12:04 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug  8 00:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Aug  8 00:12:04 2012] fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug  8 00:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Aug  8 00:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:12:28 2012] Warning, spatial fit 7 centroid is now closest to src. 33
[Wed Aug  8 00:12:28 2012] Source 30 is offset by 3.399612 and -8.703140 pixels which is larger than
2 X fitted extent = 1.446428 x 1.446428, not incorporating fit results
[Wed Aug  8 00:12:28 2012] Spatial fit model total counts = 1589.650000, observed total counts = 1278.000000
[Wed Aug  8 00:12:28 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  8 00:12:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:12:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:12:28 2012] Assessing source extent using major
[Wed Aug  8 00:12:28 2012] Source does appear to be extended
[Wed Aug  8 00:12:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:12:28 2012] Source is confused with source 23
[Wed Aug  8 06:50:36 2012] XMMSAS src. selection expression = ellipse(27935.636230, 27363.158813, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  8 06:50:36 2012] Writing source region out to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30_src.reg
[Wed Aug  8 06:50:36 2012] Extracting stamp from image fullrun_mos2_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (284, 278) - (359, 353)
[Wed Aug  8 06:50:36 2012] XMMSAS bgd. selection expression = annulus(27935.636230, 27363.158813, 1087.500000, 2175.000000, X, Y) && !ellipse(27001.459160, 27628.572600, 824.400024, 824.400024, 0.000000, X, Y) && !ellipse(26620.780000, 27671.360000, 1165.696034, 1165.696034, 0.000000, X, Y) && !ellipse(25771.148000, 27873.632000, 1179.296034, 1179.296034, 0.000000, X, Y) && !ellipse(25332.276459, 28474.867371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25213.583374, 28064.673309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.678070, 29523.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.362000, 28830.162000, 2477.840071, 2477.840071, 0.000000, X, Y) && !ellipse(26974.735992, 26155.593079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29292.366821, 28913.714508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.973358, 29437.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28229.768341, 26594.639343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.572400, 29380.908000, 647.927219, 647.927219, 0.000000, X, Y) && !ellipse(29007.245880, 28213.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26290.285370, 26255.334564, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 06:50:36 2012] Writing fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30.gif
[Wed Aug  8 06:56:12 2012] Mean detx,y = (-777.02, -179.10) 
[Wed Aug  8 06:56:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 06:56:21 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 06:56:22 2012] Setting source spectrum file to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Aug  8 06:56:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Aug  8 07:22:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 07:22:25 2012] rmf not generated due to insufficient counts
[Wed Aug  8 08:01:25 2012] Updating aperture counts using extracted products
[Wed Aug  8 08:01:25 2012] Error reading totcts from fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Aug  8 08:01:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 08:01:26 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos2_xmm0112972101_pi300-10000_pass1_cl_src30.arf
[Wed Aug  8 08:01:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 08:01:26 2012] Updating source flux to 1.2e-13
[Wed Aug  8 08:07:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting