[Tue Aug  7 10:28:39 2012] Detection parameters:
  Position = (311.3, 318.1) = 17 45 40.04 -29 0 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2469.5 +/- 63.1
  Background counts = 91.4
  Rate = 0.1 +/- 0.002

[Tue Aug  7 10:28:40 2012] Off-axis axis estimate = 1.70'
[Tue Aug  7 14:53:17 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:17 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug  7 14:53:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Aug  7 14:53:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Aug  7 16:42:11 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 16:42:11 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 16:42:11 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug  7 16:42:12 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 16:42:12 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 16:42:13 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 18:27:48 2012] Spatial fit model total counts = 6208.860000, observed total counts = 6202.000000
[Tue Aug  7 18:27:48 2012] Offset between fit and detection position for source 3 = 0.342170 pixels
[Tue Aug  7 18:27:48 2012] 6119.780000 total counts/ 4179.700000 bgd. counts: snr = 30.008693
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.342170 pixels
  Position = (311.0, 318.1) = 17 45 40.16 -29 0 27.4
  Extent = 10.5 (9.6-11.1)", rotation angle = 0
  Source counts = 1940.1 +/- 78.2
  Background counts = 4179.7
  Rate = 0.08 +/- 0.003
[Tue Aug  7 18:27:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 18:27:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 18:27:48 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 18:27:48 2012] Source does appear to be extended
[Tue Aug  7 18:27:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 18:27:48 2012] Source is confused with source 25
[Tue Aug  7 21:26:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 21:26:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 21:26:03 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Tue Aug  7 21:26:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Tue Aug  7 21:26:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.46"
[Tue Aug  7 22:58:00 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug  7 22:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 22:58:00 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug  7 22:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 22:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug  7 22:58:01 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 00:12:23 2012] Spatial fit model total counts = 7666.200000, observed total counts = 7682.000000
[Wed Aug  8 00:12:23 2012] Offset between fit and detection position for source 3 = 0.214853 pixels
[Wed Aug  8 00:12:23 2012] 7621.190000 total counts/ 5111.460000 bgd. counts: snr = 35.103831
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.214853 pixels
  Position = (310.8, 317.9) = 17 45 40.20 -29 0 28.1
  Extent = 12.6 (11.8-13.5)", rotation angle = 0
  Source counts = 2509.7 +/- 87.3
  Background counts = 5111.5
  Rate = 0.1 +/- 0.003
[Wed Aug  8 00:12:23 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:12:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:12:23 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:12:23 2012] Source does appear to be extended
[Wed Aug  8 00:12:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 03:26:51 2012] Counts = 2509.730000, rescaling region sizes by 2.000000
[Wed Aug  8 03:26:51 2012] XMMSAS src. selection expression = ellipse(26994.153400, 27609.177200, 1509.948043, 1509.948043, 0.000000, X, Y)
[Wed Aug  8 03:26:51 2012] Writing source region out to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug  8 03:26:51 2012] Extracting stamp from image fullrun_mos1_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (224, 231) - (398, 405)
[Wed Aug  8 03:26:51 2012] XMMSAS bgd. selection expression = annulus(26994.153400, 27609.177200, 5033.160145, 10066.320290, X, Y) && !ellipse(25945.335800, 27909.723000, 1160.136033, 1160.136033, 0.000000, X, Y) && !ellipse(26082.077200, 28109.018000, 1188.264034, 1188.264034, 0.000000, X, Y) && !ellipse(27303.556000, 27368.664000, 1707.320049, 886.928026, 359.850012, X, Y) && !ellipse(29644.727600, 19648.536400, 566.786666, 566.786666, 0.000000, X, Y) && !ellipse(25617.900550, 29976.424200, 380.475211, 380.475211, 0.000000, X, Y) && !ellipse(25575.214400, 29836.686000, 1084.168031, 1084.168031, 0.000000, X, Y) && !ellipse(19790.165649, 28318.294983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.597240, 22811.260000, 603.971217, 603.971217, 0.000000, X, Y) && !ellipse(25990.929200, 22223.464000, 391.725611, 391.725611, 0.000000, X, Y) && !ellipse(27419.137451, 26316.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26943.465057, 29411.025391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.047600, 29692.860600, 1281.632037, 1281.632037, 0.000000, X, Y) && !ellipse(28579.946000, 26686.368000, 2225.952064, 2225.952064, 0.000000, X, Y) && !ellipse(28740.347778, 28937.126278, 1306.293103, 513.946337, 0.000000, X, Y) && !ellipse(32944.293243, 20464.963913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21452.559060, 32295.069800, 1111.176032, 1111.176032, 0.000000, X, Y) && !ellipse(23975.014000, 31579.636000, 1332.608038, 1332.608038, 0.000000, X, Y) && !ellipse(26055.684326, 26413.420319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22558.820800, 31511.366000, 1476.912042, 1476.912042, 0.000000, X, Y) && !ellipse(26285.442000, 25447.204000, 1089.496031, 1089.496031, 0.000000, X, Y) && !ellipse(28733.522980, 28149.180237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.660000, 25892.926000, 2178.992063, 2178.992063, 0.000000, X, Y)
[Wed Aug  8 03:26:51 2012] Writing fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3.gif
[Wed Aug  8 03:27:02 2012] Mean detx,y = (349.99, -417.21) 
[Wed Aug  8 03:27:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 03:30:58 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 03:30:58 2012] Setting source spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 03:30:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  8 08:01:24 2012] Updating aperture counts using extracted products
[Wed Aug  8 08:01:24 2012] Error reading totcts from fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 08:01:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 08:01:25 2012] Using photon index=1.80, rate=0.0993, arf fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3.arf
[Wed Aug  8 08:01:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 08:01:25 2012] Updating source flux to 8.9e-13
[Wed Aug  8 08:01:28 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Aug  8 08:07:23 2012] Reading fit data from xmm0112972101/analysis//spectral/fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_pl.csv
[Wed Aug  8 08:07:23 2012] Spectral fit parameter nH value = 1.01476e+23
[Wed Aug  8 08:07:23 2012] Spectral fit parameter PhoIndex value = 2.67964
[Wed Aug  8 08:07:23 2012] Failed to get F(0.3-8.0) from xmm0112972101/analysis//spectral/fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 08:07:23 2012] Using Nh = 1e+23, photon index=2.68, rate=0.0993, arf fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src3.arf
[Wed Aug  8 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 08:07:23 2012] Updating source flux to 2.4e-12