[Tue Aug  7 10:28:40 2012] Detection parameters:
  Position = (320.0, 318.0) = 17 45 37.16 -29 0 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.8 +/- 33.5
  Background counts = 90.2
  Rate = 0.02 +/- 0.001

[Tue Aug  7 10:28:40 2012] Off-axis axis estimate = 2.11'
[Tue Aug  7 14:53:17 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 14:53:17 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Tue Aug  7 14:53:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Tue Aug  7 14:53:17 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.48"
[Tue Aug  7 16:42:11 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Aug  7 16:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5.csv
[Tue Aug  7 16:42:11 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Aug  7 16:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5.csv
[Tue Aug  7 16:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 16:42:13 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Aug  7 16:42:13 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Aug  7 16:42:13 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Aug  7 18:27:48 2012] Warning, spatial fit 5 centroid is now closest to src. 24
[Tue Aug  7 18:27:48 2012] Spatial fit model total counts = 1607.140000, observed total counts = 1604.000000
[Tue Aug  7 18:27:48 2012] Offset between fit and detection position for source 25 = 3.184735 pixels
[Tue Aug  7 18:27:48 2012] Warning, changing simple spatial fit ID from 5 to 18
[Tue Aug  7 18:27:48 2012] 1538.297000 total counts/ 1371.220000 bgd. counts: snr = 4.511938
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.184735 pixels
  Position = (319.9, 314.8) = 17 45 37.19 -29 0 41.5
  Extent = 13.9 (12.0-14.9)", rotation angle = 0
  Source counts = 167.1 +/- 39.2
  Background counts = 1371.2
  Rate = 0.007 +/- 0.002
[Tue Aug  7 18:27:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 18:27:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 18:27:48 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 18:27:48 2012] Source does appear to be extended
[Tue Aug  7 18:27:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 18:27:48 2012] Source is confused with source 3
[Tue Aug  7 21:26:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 21:26:03 2012] Initial guess for spatial extent in simple fitting = 13.91"
[Tue Aug  7 21:26:03 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.170
[Tue Aug  7 21:26:03 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.91"
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Aug  7 22:58:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5.csv
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Aug  7 22:58:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5.csv
[Tue Aug  7 22:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Aug  7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Aug  7 22:58:01 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Aug  8 00:12:23 2012] Warning, spatial fit 5 centroid is now closest to src. 30
[Wed Aug  8 00:12:23 2012] Spatial fit model total counts = 1602.660000, observed total counts = 1604.000000
[Wed Aug  8 00:12:23 2012] Offset between fit and detection position for source 25 = 5.513224 pixels
[Wed Aug  8 00:12:23 2012] Warning, changing simple spatial fit ID from 5 to 17
[Wed Aug  8 00:12:23 2012] 1594.317000 total counts/ 1427.600000 bgd. counts: snr = 4.412418
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 5.513224 pixels
  Position = (314.4, 315.1) = 17 45 39.02 -29 0 40.1
  Extent = 21.3" x 11.1", rotation angle = 360
  Source counts = 166.7 +/- 39.9
  Background counts = 1427.6
  Rate = 0.007 +/- 0.002
[Wed Aug  8 00:12:23 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:12:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:12:23 2012] Assessing source extent using major
[Wed Aug  8 00:12:23 2012] Source does appear to be extended
[Wed Aug  8 00:12:23 2012] Computing asymmetry using major and minor axis, asym = 1.92
[Wed Aug  8 00:12:23 2012] Source is asymmetric
[Wed Aug  8 03:26:51 2012] XMMSAS src. selection expression = ellipse(27303.556000, 27368.664000, 1280.490037, 665.196019, 359.850012, X, Y)
[Wed Aug  8 03:26:51 2012] Writing source region out to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25_src.reg
[Wed Aug  8 03:26:51 2012] Extracting stamp from image fullrun_mos1_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (241, 242) - (388, 389)
[Wed Aug  8 03:26:51 2012] XMMSAS bgd. selection expression = annulus(27303.556000, 27368.664000, 2134.150061, 4268.300123, X, Y) && !ellipse(26994.153400, 27609.177200, 1006.632029, 1006.632029, 0.000000, X, Y) && !ellipse(25945.335800, 27909.723000, 1160.136033, 1160.136033, 0.000000, X, Y) && !ellipse(26082.077200, 28109.018000, 1188.264034, 1188.264034, 0.000000, X, Y) && !ellipse(25617.900550, 29976.424200, 380.475211, 380.475211, 0.000000, X, Y) && !ellipse(25575.214400, 29836.686000, 1084.168031, 1084.168031, 0.000000, X, Y) && !ellipse(26926.597240, 22811.260000, 603.971217, 603.971217, 0.000000, X, Y) && !ellipse(27419.137451, 26316.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26943.465057, 29411.025391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.047600, 29692.860600, 1281.632037, 1281.632037, 0.000000, X, Y) && !ellipse(28579.946000, 26686.368000, 2225.952064, 2225.952064, 0.000000, X, Y) && !ellipse(28740.347778, 28937.126278, 1306.293103, 513.946337, 0.000000, X, Y) && !ellipse(23975.014000, 31579.636000, 1332.608038, 1332.608038, 0.000000, X, Y) && !ellipse(26055.684326, 26413.420319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22558.820800, 31511.366000, 1476.912042, 1476.912042, 0.000000, X, Y) && !ellipse(26285.442000, 25447.204000, 1089.496031, 1089.496031, 0.000000, X, Y) && !ellipse(28733.522980, 28149.180237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.660000, 25892.926000, 2178.992063, 2178.992063, 0.000000, X, Y)
[Wed Aug  8 03:26:51 2012] Writing fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25.gif
[Wed Aug  8 03:42:20 2012] Mean detx,y = (117.83, -150.01) 
[Wed Aug  8 03:42:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 03:42:29 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 03:42:29 2012] Setting source spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Aug  8 03:42:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Aug  8 08:01:24 2012] Updating aperture counts using extracted products
[Wed Aug  8 08:01:24 2012] Error reading totcts from fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Aug  8 08:01:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 08:01:25 2012] Using photon index=1.80, rate=0.0066, arf fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src25.arf
[Wed Aug  8 08:01:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 08:01:25 2012] Updating source flux to 6.2e-14
[Wed Aug  8 08:01:28 2012] Flag c found in src. 25 procflags, skipping spectral fitting