[Tue Aug 7 10:28:40 2012] Detection parameters: Position = (310.3, 338.6) = 17 45 40.39 -28 59 4.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 122.7 +/- 18.4 Background counts = 79.0 Rate = 0.006 +/- 0.0009 [Tue Aug 7 10:28:40 2012] Off-axis axis estimate = 3.04' [Tue Aug 7 14:53:17 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 14:53:17 2012] Initial guess for spatial extent in simple fitting = 7.95" [Tue Aug 7 14:53:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924 [Tue Aug 7 14:53:17 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.95" [Tue Aug 7 16:42:12 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15.ximg exists [Tue Aug 7 16:42:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15.csv [Tue Aug 7 16:42:12 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15_1.ximg exists [Tue Aug 7 16:42:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15.csv [Tue Aug 7 16:42:12 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 16:42:13 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Tue Aug 7 16:42:13 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Tue Aug 7 16:42:13 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Tue Aug 7 18:27:48 2012] Source 18 is offset by 1.038357 and 5.922568 pixels which is larger than 2 X fitted extent = 3.361761 x 3.361761, not incorporating fit results [Tue Aug 7 18:27:48 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 18:27:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 18:27:48 2012] Assessing source extent using major [Tue Aug 7 18:27:48 2012] Source does appear to be extended [Tue Aug 7 18:27:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 18:27:48 2012] Source is confused with source 19 [Tue Aug 7 21:26:03 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 21:26:03 2012] Initial guess for spatial extent in simple fitting = 7.95" [Tue Aug 7 21:26:03 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924 [Tue Aug 7 21:26:03 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.95" [Tue Aug 7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15.ximg exists [Tue Aug 7 22:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15.csv [Tue Aug 7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15_1.ximg exists [Tue Aug 7 22:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15.csv [Tue Aug 7 22:58:01 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Tue Aug 7 22:58:01 2012] fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Tue Aug 7 22:58:01 2012] Fit fullrun_mos1_xmm0112972101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Wed Aug 8 00:12:23 2012] Source 18 is offset by -1.082425 and 3.280338 pixels which is larger than 2 X fitted extent = 1.666860 x 1.666860, not incorporating fit results [Wed Aug 8 00:12:23 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 20.947246 pixels away [Wed Aug 8 00:12:23 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 29.573413 pixels away [Wed Aug 8 00:12:23 2012] Source 18 is offset by 1.099840 and 5.922568 pixels which is larger than 2 X fitted extent = 3.470704 x 3.470704, not incorporating fit results [Wed Aug 8 00:12:23 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.600192 pixels away [Wed Aug 8 00:12:23 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 00:12:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 00:12:23 2012] Assessing source extent using major [Wed Aug 8 00:12:23 2012] Source does appear to be extended [Wed Aug 8 00:12:23 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 03:26:51 2012] XMMSAS src. selection expression = ellipse(26943.465057, 29411.025391, 652.500000, 652.500000, 0.000000, X, Y) [Wed Aug 8 03:26:51 2012] Writing source region out to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18_src.reg [Wed Aug 8 03:26:51 2012] Extracting stamp from image fullrun_mos1_xmm0112972101_pi300-10000_cl_sm2.00.img.gz, (273, 301) - (348, 376) [Wed Aug 8 03:26:51 2012] XMMSAS bgd. selection expression = annulus(26943.465057, 29411.025391, 1087.500000, 2175.000000, X, Y) && !ellipse(26994.153400, 27609.177200, 1006.632029, 1006.632029, 0.000000, X, Y) && !ellipse(25945.335800, 27909.723000, 1160.136033, 1160.136033, 0.000000, X, Y) && !ellipse(26082.077200, 28109.018000, 1188.264034, 1188.264034, 0.000000, X, Y) && !ellipse(27303.556000, 27368.664000, 1707.320049, 886.928026, 359.850012, X, Y) && !ellipse(25617.900550, 29976.424200, 380.475211, 380.475211, 0.000000, X, Y) && !ellipse(25575.214400, 29836.686000, 1084.168031, 1084.168031, 0.000000, X, Y) && !ellipse(26218.047600, 29692.860600, 1281.632037, 1281.632037, 0.000000, X, Y) && !ellipse(28579.946000, 26686.368000, 2225.952064, 2225.952064, 0.000000, X, Y) && !ellipse(28740.347778, 28937.126278, 1306.293103, 513.946337, 0.000000, X, Y) && !ellipse(23975.014000, 31579.636000, 1332.608038, 1332.608038, 0.000000, X, Y) && !ellipse(26055.684326, 26413.420319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28733.522980, 28149.180237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26777.660000, 25892.926000, 2178.992063, 2178.992063, 0.000000, X, Y) [Wed Aug 8 03:26:51 2012] Writing fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18.gif [Wed Aug 8 03:45:00 2012] Mean detx,y = (2015.25, -291.84) [Wed Aug 8 03:45:01 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 8 03:45:11 2012] Binned source spectrum to 10 counts/bin [Wed Aug 8 03:45:11 2012] Setting source spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Wed Aug 8 03:45:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18_bgd.pi.gz [Wed Aug 8 05:09:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Aug 8 05:09:45 2012] rmf not generated due to insufficient counts [Wed Aug 8 08:01:25 2012] Updating aperture counts using extracted products [Wed Aug 8 08:01:25 2012] Error reading totcts from fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Wed Aug 8 08:01:25 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 8 08:01:25 2012] Using photon index=1.80, rate=0.00569, arf fullrun_mos1_xmm0112972101_pi300-10000_pass1_cl_src18.arf [Wed Aug 8 08:01:25 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 8 08:01:25 2012] Updating source flux to 6.1e-14 [Wed Aug 8 08:01:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting