[Wed Jul 11 10:07:42 2012] Detection parameters:
  Position = (416.8, 260.8) = 17 43 51.24 -28 46 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 504.8 +/- 26.8
  Background counts = 10.0
  Rate = 0.1 +/- 0.006

[Wed Jul 11 10:07:42 2012] Off-axis axis estimate = 9.00'
[Wed Jul 11 10:09:01 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 10:09:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 10:09:01 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Wed Jul 11 10:09:01 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.826
[Wed Jul 11 10:09:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.93"
[Wed Jul 11 10:19:31 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 10:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 10:19:31 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 10:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 10:19:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 10:19:31 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 10:19:31 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 10:19:31 2012] Fit fullrun_pn_xmm0112971901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 10:34:24 2012] Spatial fit model total counts = 623.828000, observed total counts = 571.000000
[Wed Jul 11 10:34:24 2012] Offset between fit and detection position for source 1 = 0.270946 pixels
[Wed Jul 11 10:34:24 2012] 624.989000 total counts/ 215.002000 bgd. counts: snr = 27.960751
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.270946 pixels
  Position = (416.6, 260.6) = 17 43 51.31 -28 46 36.9
  Extent = 6.5 (5.9-7.2)", rotation angle = 0
  Source counts = 410.0 +/- 25.0
  Background counts = 215.0
  Rate = 0.09 +/- 0.005
[Wed Jul 11 10:34:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 10:34:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 10:34:24 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 10:34:24 2012] Source does appear to be extended
[Wed Jul 11 10:34:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 10:34:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 10:34:30 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Wed Jul 11 10:34:30 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.012
[Wed Jul 11 10:34:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.47"
[Wed Jul 11 10:44:05 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 10:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 10:44:05 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 10:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 10:44:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 10:44:06 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 10:44:06 2012] fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 10:44:06 2012] Fit fullrun_pn_xmm0112971901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 10:55:52 2012] Spatial fit model total counts = 563.759000, observed total counts = 518.000000
[Wed Jul 11 10:55:52 2012] Offset between fit and detection position for source 1 = 0.033937 pixels
[Wed Jul 11 10:55:52 2012] 567.990000 total counts/ 179.087000 bgd. counts: snr = 29.060914
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033937 pixels
  Position = (416.6, 260.6) = 17 43 51.30 -28 46 37.0
  Extent = 6.1 (5.6-6.9)", rotation angle = 0
  Source counts = 388.9 +/- 23.8
  Background counts = 179.1
  Rate = 0.08 +/- 0.005
[Wed Jul 11 10:55:52 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 10:55:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 10:55:52 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 10:55:52 2012] Source does appear to be extended
[Wed Jul 11 10:55:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 10:55:59 2012] XMMSAS src. selection expression = ellipse(36194.584000, 22621.608200, 367.640411, 367.640411, 0.000000, X, Y)
[Wed Jul 11 10:55:59 2012] Writing source region out to fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 10:55:59 2012] Extracting stamp from image fullrun_pn_xmm0112971901_pi300-10000_cl_sm2.00.img.gz, (395, 239) - (438, 282)
[Wed Jul 11 10:55:59 2012] XMMSAS bgd. selection expression = annulus(36194.584000, 22621.608200, 612.734018, 1225.468035, X, Y)
[Wed Jul 11 10:55:59 2012] Writing fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 10:56:02 2012] Mean detx,y = (-11046.94, -2676.75) 
[Wed Jul 11 10:56:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 10:56:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 10:56:14 2012] Setting source spectrum file to fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 10:56:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 11 11:09:34 2012] Updating aperture counts using extracted products
[Wed Jul 11 11:09:34 2012] Error reading totcts from fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 11:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 11:09:34 2012] Using photon index=1.80, rate=0.0828, arf fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 11:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 11:09:34 2012] Updating source flux to 5.9e-13
[Wed Jul 11 11:09:51 2012] Reading fit data from xmm0112971901/analysis//spectral/fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 11 11:09:51 2012] Spectral fit parameter nH value = 3.53117e+21
[Wed Jul 11 11:09:51 2012] Spectral fit parameter PhoIndex value = 2.78527
[Wed Jul 11 11:09:51 2012] Failed to get F(0.3-8.0) from xmm0112971901/analysis//spectral/fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 11 11:09:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 11:09:51 2012] Using Nh = 3.5e+21, photon index=2.79, rate=0.0828, arf fullrun_pn_xmm0112971901_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 11:09:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 11:09:51 2012] Updating source flux to 6e-13