[Tue Mar  6 09:00:18 2012] Detection parameters:
  Position = (194.4, 299.0) = 17 43 57.82 -29 46 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.6 +/- 22.2
  Background counts = 37.2
  Rate = 0.04 +/- 0.004

[Tue Mar  6 09:00:21 2012] Off-axis axis estimate = 7.54'
[Tue Mar  6 09:03:09 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 09:03:09 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Tue Mar  6 09:03:09 2012] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.741
[Tue Mar  6 09:03:09 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.20"
[Tue Mar  6 18:42:59 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8.ximg exists
[Tue Mar  6 18:42:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8.csv
[Tue Mar  6 18:42:59 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Mar  6 18:42:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8.csv
[Tue Mar  6 18:42:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:43:02 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Mar  6 18:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Mar  6 18:43:02 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Mar  6 18:43:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Mar  6 18:43:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 23:32:05 2012] Spatial fit model total counts = 4792.510000, observed total counts = 4499.000000
[Tue Mar  6 23:32:05 2012] Offset between fit and detection position for source 8 = 8.433201 pixels
[Tue Mar  6 23:32:05 2012] Warning, changing simple spatial fit ID from 8 to 6
[Tue Mar  6 23:32:05 2012] 4389.810000 total counts/ 2167.810000 bgd. counts: snr = 47.723627
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 8.433201 pixels
  Position = (186.9, 302.9) = 17 44 0.32 -29 45 45.3
  Extent = 20.5 (20.2-41.0)", rotation angle = 0
  Source counts = 2222.0 +/- 66.3
  Background counts = 2167.8
  Rate = 0.2 +/- 0.007
[Tue Mar  6 23:32:06 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:06 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 23:32:06 2012] Source does appear to be extended
[Tue Mar  6 23:32:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:06 2012] Source is confused with source 5
[Tue Mar  6 23:32:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 23:32:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 23:32:24 2012] Initial guess for spatial extent in simple fitting = 20.48"
[Tue Mar  6 23:32:24 2012] source mask rpix=4.7, npix_max = 108, mask sum = 79, frac = 0.728
[Tue Mar  6 23:32:24 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 20.48"
[Wed Mar  7 10:33:47 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8.ximg exists
[Wed Mar  7 10:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8.csv
[Wed Mar  7 10:33:47 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Mar  7 10:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8.csv
[Wed Mar  7 10:33:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Mar  7 10:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Mar  7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Mar  7 10:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Mar  7 10:33:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 13:10:15 2012] Warning, spatial fit 8 centroid is now closest to src. 116
[Wed Mar  7 13:10:15 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:15 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:10:15 2012] Source does appear to be extended
[Wed Mar  7 13:10:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 13:10:39 2012] Counts = 2222.000000, rescaling region sizes by 2.000000
[Wed Mar  7 13:10:39 2012] XMMSAS src. selection expression = ellipse(16212.194000, 26300.956000, 2457.876071, 2457.876071, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing source region out to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8_src.reg
[Wed Mar  7 13:10:39 2012] Extracting stamp from image fullrun_pn_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (46, 162) - (328, 444)
[Wed Mar  7 13:10:39 2012] XMMSAS bgd. selection expression = annulus(16212.194000, 26300.956000, 8192.920236, 16385.840471, X, Y) && !ellipse(17658.049400, 27477.559600, 1889.145654, 1889.145654, 0.000000, X, Y) && !ellipse(16737.213837, 27958.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16763.596863, 27254.538910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16804.135178, 26757.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.586800, 25583.290000, 1569.320045, 1569.320045, 0.000000, X, Y) && !ellipse(15220.383652, 35896.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16845.047852, 36591.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17296.831000, 29288.334000, 1544.744044, 871.792025, 87.828000, X, Y) && !ellipse(18716.788800, 23079.732200, 498.911214, 498.911214, 0.000000, X, Y) && !ellipse(17461.374000, 38323.066000, 1841.864053, 1841.864053, 354.534000, X, Y) && !ellipse(17094.340600, 33237.216000, 762.405622, 762.405622, 0.000000, X, Y) && !ellipse(17276.316208, 31691.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19066.779800, 30538.431600, 913.440026, 913.440026, 0.000000, X, Y) && !ellipse(18657.136000, 28677.000000, 1520.408044, 1520.408044, 0.000000, X, Y) && !ellipse(18389.884613, 25186.547211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.227805, 24713.857129, 1569.088045, 1041.543365, 261.681592, X, Y) && !ellipse(32646.330000, 39200.365000, 2038.736059, 2038.736059, 0.000000, X, Y) && !ellipse(24098.447000, 38477.164400, 1068.376031, 1068.376031, 0.000000, X, Y) && !ellipse(18042.964000, 37977.936000, 1711.568049, 1711.568049, 0.000000, X, Y) && !ellipse(24666.434937, 38050.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32802.110000, 37627.762200, 1959.216056, 1959.216056, 0.000000, X, Y) && !ellipse(16853.631561, 36152.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17136.105400, 32966.460000, 1417.024041, 1417.024041, 0.000000, X, Y) && !ellipse(18097.630936, 30742.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20101.178600, 29987.482000, 1522.056044, 1522.056044, 0.000000, X, Y) && !ellipse(19834.204620, 29180.536987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16505.259857, 28834.055664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20308.038000, 28578.246000, 1466.728042, 1466.728042, 0.000000, X, Y) && !ellipse(22002.597580, 28661.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20048.230515, 27894.817810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20495.042740, 27181.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15739.700745, 26926.794128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20243.432251, 26498.224609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20242.590607, 25710.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.031196, 25649.706000, 1499.624043, 1499.624043, 0.000000, X, Y) && !ellipse(18371.458710, 24582.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17862.274200, 24322.750000, 1571.904045, 1571.904045, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8.gif
[Wed Mar  7 13:22:16 2012] Mean detx,y = (7144.44, 3638.64) 
[Wed Mar  7 13:22:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 13:30:28 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 13:30:29 2012] Setting source spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar  7 13:30:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Mar  7 16:41:46 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:46 2012] Error reading totcts from fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Mar  7 16:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:48 2012] Using photon index=1.80, rate=0.23, arf fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src8.arf
[Wed Mar  7 16:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:48 2012] Updating source flux to 2.8e-12
[Wed Mar  7 16:46:53 2012] Flag c found in src. 8 procflags, skipping spectral fitting