[Tue Mar 6 09:00:19 2012] Detection parameters: Position = (208.4, 433.6) = 17 43 53.08 -29 36 17.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.8 +/- 8.9 Background counts = 10.2 Rate = 0.004 +/- 0.0009 [Tue Mar 6 09:00:21 2012] Off-axis axis estimate = 11.77' [Tue Mar 6 09:03:09 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 09:03:09 2012] Initial guess for spatial extent in simple fitting = 12.31" [Tue Mar 6 09:03:09 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.104 [Tue Mar 6 09:03:09 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 12.31" [Tue Mar 6 18:43:01 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src62.ximg exists [Tue Mar 6 18:43:01 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src62_1.ximg exists [Tue Mar 6 18:43:01 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src62 appears to have run properly [Tue Mar 6 18:43:04 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62.ximg exists [Tue Mar 6 18:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62.csv [Tue Mar 6 18:43:04 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists [Tue Mar 6 18:43:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62.csv [Tue Mar 6 18:43:04 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 23:32:05 2012] Source 62 is offset by 3.651165 and 0.795544 pixels which is larger than 2 X fitted extent = 1.409853 x 1.409853, not incorporating fit results [Tue Mar 6 23:32:05 2012] Warning, spatial fit 62 centroid is now closest to src. 72 [Tue Mar 6 23:32:05 2012] Source 62 is offset by -1.600674 and -6.051836 pixels which is larger than 2 X fitted extent = 3.317550 x 3.317550, not incorporating fit results [Tue Mar 6 23:32:05 2012] Spatial fit model total counts = 477.100000, observed total counts = 478.000000 [Tue Mar 6 23:32:05 2012] Offset between fit and detection position for source 62 = 3.544047 pixels [Tue Mar 6 23:32:05 2012] Warning, changing simple spatial fit ID from 62 to 75 [Tue Mar 6 23:32:05 2012] 419.486100 total counts/ 340.885000 bgd. counts: snr = 4.257206 Spatial fit parameters: Offset between fit and detection position for source 62 = 3.544047 pixels Position = (207.9, 437.1) = 17 43 53.24 -29 36 1.6 Extent = 21.4 (14.7-24.8)", rotation angle = 0 Source counts = 78.6 +/- 20.5 Background counts = 340.9 Rate = 0.008 +/- 0.002 [Tue Mar 6 23:32:06 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 23:32:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 23:32:06 2012] Assessing source extent using major axis lower bound [Tue Mar 6 23:32:06 2012] Source does appear to be extended [Tue Mar 6 23:32:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 23:32:06 2012] Source is confused with source 15 [Tue Mar 6 23:32:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Mar 6 23:32:24 2012] Initial guess for spatial extent in simple fitting = 21.39" [Tue Mar 6 23:32:24 2012] source mask rpix=4.9, npix_max = 117, mask sum = 110, frac = 0.937 [Tue Mar 6 23:32:24 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 21.39" [Wed Mar 7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src25.ximg exists [Wed Mar 7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src25_1.ximg exists [Wed Mar 7 10:33:48 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src25 appears to have run properly [Wed Mar 7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Wed Mar 7 10:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25.csv [Wed Mar 7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Wed Mar 7 10:33:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25.csv [Wed Mar 7 10:33:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 13:10:15 2012] Warning, spatial fit 25 centroid is now closest to src. 15 [Wed Mar 7 13:10:15 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 13:10:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 13:10:15 2012] Assessing source extent using major axis lower bound [Wed Mar 7 13:10:15 2012] Source does appear to be extended [Wed Mar 7 13:10:15 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 13:10:40 2012] XMMSAS src. selection expression = ellipse(18042.964000, 37977.936000, 1283.676037, 1283.676037, 0.000000, X, Y) [Wed Mar 7 13:10:40 2012] Writing source region out to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62_src.reg [Wed Mar 7 13:10:40 2012] Extracting stamp from image fullrun_pn_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (134, 363) - (282, 511) [Wed Mar 7 13:10:40 2012] XMMSAS bgd. selection expression = annulus(18042.964000, 37977.936000, 2139.460062, 4278.920123, X, Y) && !ellipse(15220.383652, 35896.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16845.047852, 36591.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17461.374000, 38323.066000, 1841.864053, 1841.864053, 354.534000, X, Y) && !ellipse(17094.340600, 33237.216000, 762.405622, 762.405622, 0.000000, X, Y) && !ellipse(16853.631561, 36152.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17136.105400, 32966.460000, 1417.024041, 1417.024041, 0.000000, X, Y) [Wed Mar 7 13:10:40 2012] Writing fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62.gif [Wed Mar 7 13:47:18 2012] Mean detx,y = (5810.80, 13618.86) [Wed Mar 7 13:47:22 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 13:48:39 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 13:48:39 2012] Setting source spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Wed Mar 7 13:48:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62_bgd.pi.gz [Wed Mar 7 14:54:04 2012] Not generating rmf since there are only 78 counts [Wed Mar 7 14:54:04 2012] rmf not generated due to insufficient counts [Wed Mar 7 16:41:46 2012] Updating aperture counts using extracted products [Wed Mar 7 16:41:46 2012] Error reading totcts from fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Wed Mar 7 16:41:49 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 16:41:49 2012] Using photon index=1.80, rate=0.00813, arf fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src62.arf [Wed Mar 7 16:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 16:41:49 2012] Updating source flux to 5.4e-14 [Wed Mar 7 16:46:53 2012] Flag b found in src. 62 procflags, skipping spectral fitting [Wed Mar 7 16:46:53 2012] Flag c found in src. 62 procflags, skipping spectral fitting [Wed Mar 7 16:46:53 2012] Source 62 has fewer than 100.000000 counts, skipping spectral fitting