[Tue Mar  6 09:00:18 2012] Detection parameters:
  Position = (220.0, 342.9) = 17 43 49.26 -29 42 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 16.1
  Background counts = 13.1
  Rate = 0.02 +/- 0.002

[Tue Mar  6 09:00:21 2012] Off-axis axis estimate = 6.54'
[Tue Mar  6 09:03:09 2012] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 09:03:09 2012] Initial guess for spatial extent in simple fitting = 9.70"
[Tue Mar  6 09:03:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.208
[Tue Mar  6 09:03:09 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.70"
[Tue Mar  6 18:42:59 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21.ximg exists
[Tue Mar  6 18:42:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21.csv
[Tue Mar  6 18:42:59 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Mar  6 18:42:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21.csv
[Tue Mar  6 18:42:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:43:03 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Mar  6 18:43:03 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Mar  6 18:43:03 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Mar  6 23:32:05 2012] Spatial fit model total counts = 908.378000, observed total counts = 917.000000
[Tue Mar  6 23:32:05 2012] Offset between fit and detection position for source 21 = 5.468358 pixels
[Tue Mar  6 23:32:05 2012] 843.947000 total counts/ 383.735000 bgd. counts: snr = 23.493203
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 5.468358 pixels
  Position = (217.7, 337.9) = 17 43 50.01 -29 43 13.2
  Extent = 19.3 (19.2-19.4)", rotation angle = 0
  Source counts = 460.2 +/- 29.1
  Background counts = 383.7
  Rate = 0.05 +/- 0.003
[Tue Mar  6 23:32:06 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:06 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 23:32:06 2012] Source does appear to be extended
[Tue Mar  6 23:32:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:06 2012] Source is confused with source 104
[Tue Mar  6 23:32:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 23:32:24 2012] Initial guess for spatial extent in simple fitting = 19.33"
[Tue Mar  6 23:32:24 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.023
[Tue Mar  6 23:32:24 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 19.33"
[Wed Mar  7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src19.ximg exists
[Wed Mar  7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Mar  7 10:33:48 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src19 appears to have run properly
[Wed Mar  7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Mar  7 10:33:49 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Mar  7 10:33:49 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Mar  7 13:10:15 2012] Warning, spatial fit 19 centroid is now closest to src. 104
[Wed Mar  7 13:10:15 2012] Spatial fit model total counts = 2245.840000, observed total counts = 2073.000000
[Wed Mar  7 13:10:15 2012] Offset between fit and detection position for source 21 = 8.161489 pixels
[Wed Mar  7 13:10:15 2012] Warning, changing simple spatial fit ID from 19 to 31
[Wed Mar  7 13:10:15 2012] 2083.818000 total counts/ 1957.110000 bgd. counts: snr = 2.864154
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 8.161489 pixels
  Position = (215.0, 330.2) = 17 43 50.92 -29 43 46.6
  Extent = 19.0 (9.7-30.9)", rotation angle = 0
  Source counts = 126.7 +/- 45.6
  Background counts = 1957.1
  Rate = 0.01 +/- 0.005
[Wed Mar  7 13:10:15 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:15 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:10:15 2012] Source does appear to be extended
[Wed Mar  7 13:10:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 13:10:39 2012] XMMSAS src. selection expression = ellipse(18657.136000, 28677.000000, 1140.306033, 1140.306033, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing source region out to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21_src.reg
[Wed Mar  7 13:10:39 2012] Extracting stamp from image fullrun_pn_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (149, 265) - (281, 396)
[Wed Mar  7 13:10:39 2012] XMMSAS bgd. selection expression = annulus(18657.136000, 28677.000000, 1900.510055, 3801.020109, X, Y) && !ellipse(17658.049400, 27477.559600, 1889.145654, 1889.145654, 0.000000, X, Y) && !ellipse(16737.213837, 27958.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16763.596863, 27254.538910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16804.135178, 26757.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.586800, 25583.290000, 1569.320045, 1569.320045, 0.000000, X, Y) && !ellipse(16212.194000, 26300.956000, 1638.584047, 1638.584047, 0.000000, X, Y) && !ellipse(17296.831000, 29288.334000, 1544.744044, 871.792025, 87.828000, X, Y) && !ellipse(17094.340600, 33237.216000, 762.405622, 762.405622, 0.000000, X, Y) && !ellipse(17276.316208, 31691.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19066.779800, 30538.431600, 913.440026, 913.440026, 0.000000, X, Y) && !ellipse(18389.884613, 25186.547211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.227805, 24713.857129, 1569.088045, 1041.543365, 261.681592, X, Y) && !ellipse(17136.105400, 32966.460000, 1417.024041, 1417.024041, 0.000000, X, Y) && !ellipse(18097.630936, 30742.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20101.178600, 29987.482000, 1522.056044, 1522.056044, 0.000000, X, Y) && !ellipse(19834.204620, 29180.536987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16505.259857, 28834.055664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20308.038000, 28578.246000, 1466.728042, 1466.728042, 0.000000, X, Y) && !ellipse(22002.597580, 28661.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20048.230515, 27894.817810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20495.042740, 27181.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15739.700745, 26926.794128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20243.432251, 26498.224609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20242.590607, 25710.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.031196, 25649.706000, 1499.624043, 1499.624043, 0.000000, X, Y) && !ellipse(18371.458710, 24582.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17862.274200, 24322.750000, 1571.904045, 1571.904045, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21.gif
[Wed Mar  7 13:41:02 2012] Mean detx,y = (6297.34, 4562.22) 
[Wed Mar  7 13:41:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 13:42:04 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 13:42:04 2012] Setting source spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Mar  7 13:42:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Mar  7 16:41:46 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:46 2012] Error reading totcts from fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Mar  7 16:41:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:49 2012] Using photon index=1.80, rate=0.0131, arf fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src21.arf
[Wed Mar  7 16:41:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:49 2012] Updating source flux to 4.2e-14
[Wed Mar  7 16:46:53 2012] Flag c found in src. 21 procflags, skipping spectral fitting