[Tue Mar  6 09:00:18 2012] Detection parameters:
  Position = (203.7, 316.2) = 17 43 54.71 -29 44 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54447.1 +/- 279.3
  Background counts = 18.9
  Rate = 8 +/- 0.04

[Tue Mar  6 09:00:21 2012] Off-axis axis estimate = 6.99'
[Tue Mar  6 09:03:09 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 09:03:09 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar  6 09:03:09 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Tue Mar  6 09:03:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Tue Mar  6 18:42:58 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 18:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 18:42:58 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 18:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 18:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 18:43:02 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 18:43:02 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 18:43:02 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar  6 23:32:05 2012] Spatial fit model total counts = 60572.500000, observed total counts = 60375.000000
[Tue Mar  6 23:32:05 2012] Offset between fit and detection position for source 1 = 0.231302 pixels
[Tue Mar  6 23:32:05 2012] 61085.000000 total counts/ 14816.900000 bgd. counts: snr = 380.104482
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.231302 pixels
  Position = (203.6, 316.4) = 17 43 54.75 -29 44 46.6
  Extent = 8.0 (8.0-8.1)", rotation angle = 0
  Source counts = 46268.1 +/- 247.2
  Background counts = 14816.9
  Rate = 5 +/- 0.03
[Tue Mar  6 23:32:06 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:06 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 23:32:06 2012] Source does appear to be extended
[Tue Mar  6 23:32:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 23:32:24 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Tue Mar  6 23:32:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.132
[Tue Mar  6 23:32:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.05"
[Wed Mar  7 10:33:47 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 10:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 10:33:47 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 10:33:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 10:33:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 10:33:48 2012] fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 10:33:48 2012] Fit fullrun_pn_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 13:10:15 2012] Spatial fit model total counts = 58200.500000, observed total counts = 58346.000000
[Wed Mar  7 13:10:15 2012] Offset between fit and detection position for source 1 = 0.044623 pixels
[Wed Mar  7 13:10:15 2012] 58745.500000 total counts/ 13600.700000 bgd. counts: snr = 387.103504
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.044623 pixels
  Position = (203.5, 316.4) = 17 43 54.76 -29 44 46.6
  Extent = 7.9 (7.8-7.9)", rotation angle = 0
  Source counts = 45144.8 +/- 242.4
  Background counts = 13600.7
  Rate = 5 +/- 0.03
[Wed Mar  7 13:10:15 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:15 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:10:15 2012] Source does appear to be extended
[Wed Mar  7 13:10:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 13:10:39 2012] Counts = 45144.800000, rescaling region sizes by 3.000000
[Wed Mar  7 13:10:39 2012] XMMSAS src. selection expression = ellipse(17658.049400, 27477.559600, 1416.859241, 1416.859241, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing source region out to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 13:10:39 2012] Extracting stamp from image fullrun_pn_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (122, 235) - (285, 398)
[Wed Mar  7 13:10:39 2012] XMMSAS bgd. selection expression = annulus(17658.049400, 27477.559600, 7084.296204, 14168.592408, X, Y) && !ellipse(16737.213837, 27958.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16763.596863, 27254.538910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16804.135178, 26757.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.586800, 25583.290000, 1569.320045, 1569.320045, 0.000000, X, Y) && !ellipse(16212.194000, 26300.956000, 1638.584047, 1638.584047, 0.000000, X, Y) && !ellipse(15220.383652, 35896.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16845.047852, 36591.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17296.831000, 29288.334000, 1544.744044, 871.792025, 87.828000, X, Y) && !ellipse(18716.788800, 23079.732200, 498.911214, 498.911214, 0.000000, X, Y) && !ellipse(17461.374000, 38323.066000, 1841.864053, 1841.864053, 354.534000, X, Y) && !ellipse(17094.340600, 33237.216000, 762.405622, 762.405622, 0.000000, X, Y) && !ellipse(17276.316208, 31691.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19066.779800, 30538.431600, 913.440026, 913.440026, 0.000000, X, Y) && !ellipse(18657.136000, 28677.000000, 1520.408044, 1520.408044, 0.000000, X, Y) && !ellipse(18389.884613, 25186.547211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.227805, 24713.857129, 1569.088045, 1041.543365, 261.681592, X, Y) && !ellipse(32646.330000, 39200.365000, 2038.736059, 2038.736059, 0.000000, X, Y) && !ellipse(24098.447000, 38477.164400, 1068.376031, 1068.376031, 0.000000, X, Y) && !ellipse(18042.964000, 37977.936000, 1711.568049, 1711.568049, 0.000000, X, Y) && !ellipse(24666.434937, 38050.830566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32802.110000, 37627.762200, 1959.216056, 1959.216056, 0.000000, X, Y) && !ellipse(16853.631561, 36152.051849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17136.105400, 32966.460000, 1417.024041, 1417.024041, 0.000000, X, Y) && !ellipse(18097.630936, 30742.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20101.178600, 29987.482000, 1522.056044, 1522.056044, 0.000000, X, Y) && !ellipse(19834.204620, 29180.536987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16505.259857, 28834.055664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20308.038000, 28578.246000, 1466.728042, 1466.728042, 0.000000, X, Y) && !ellipse(22002.597580, 28661.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20048.230515, 27894.817810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20495.042740, 27181.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15739.700745, 26926.794128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20243.432251, 26498.224609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20242.590607, 25710.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.031196, 25649.706000, 1499.624043, 1499.624043, 0.000000, X, Y) && !ellipse(18371.458710, 24582.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17862.274200, 24322.750000, 1571.904045, 1571.904045, 0.000000, X, Y)
[Wed Mar  7 13:10:39 2012] Writing fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 13:11:08 2012] Mean detx,y = (6964.43, 3796.83) 
[Wed Mar  7 13:11:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 13:18:32 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 13:18:32 2012] Setting source spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 13:18:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 16:41:45 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:45 2012] Error reading totcts from fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 16:41:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:48 2012] Using photon index=1.80, rate=4.67, arf fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 16:41:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:48 2012] Updating source flux to 1.5e-11
[Wed Mar  7 16:54:49 2012] Reading fit data from xmm0112971801/analysis//spectral/fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 16:54:49 2012] Spectral fit parameter nH value = 9.24627e+22
[Wed Mar  7 16:54:49 2012] Spectral fit parameter PhoIndex value = 1.28118
[Wed Mar  7 16:54:49 2012] Failed to get F(0.3-8.0) from xmm0112971801/analysis//spectral/fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 16:54:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:54:49 2012] Using Nh = 9.2e+22, photon index=1.28, rate=4.67, arf fullrun_pn_xmm0112971801_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 16:54:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:54:49 2012] Updating source flux to 6.2e-11