[Tue Mar  6 09:01:06 2012] Detection parameters:
  Position = (203.7, 316.2) = 17 43 54.71 -29 44 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25223.1 +/- 187.3
  Background counts = 49.9
  Rate = 2 +/- 0.02

[Tue Mar  6 09:01:07 2012] Off-axis axis estimate = 6.99'
[Tue Mar  6 20:20:14 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 20:20:14 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar  6 20:20:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Tue Mar  6 20:20:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 23:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 23:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 23:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 23:31:37 2012] Fit fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar  6 23:32:15 2012] Spatial fit model total counts = 24025.500000, observed total counts = 24045.000000
[Tue Mar  6 23:32:15 2012] Offset between fit and detection position for source 4 = 0.399235 pixels
[Tue Mar  6 23:32:15 2012] 23910.650000 total counts/ 5622.750000 bgd. counts: snr = 243.887449
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.399235 pixels
  Position = (203.3, 316.3) = 17 43 54.83 -29 44 46.9
  Extent = 8.3 (8.2-8.4)", rotation angle = 0
  Source counts = 18287.9 +/- 154.6
  Background counts = 5622.8
  Rate = 2 +/- 0.01
[Tue Mar  6 23:32:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:15 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 23:32:15 2012] Source does appear to be extended
[Tue Mar  6 23:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:15 2012] Source is confused with source 11
[Wed Mar  7 11:58:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:58:48 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Mar  7 11:58:48 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.081
[Wed Mar  7 11:58:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.28"
[Wed Mar  7 13:09:57 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 13:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 13:09:57 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 13:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 13:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 13:09:57 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 13:09:57 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 13:09:57 2012] Fit fullrun_mos2_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 13:10:24 2012] Spatial fit model total counts = 23204.100000, observed total counts = 23204.000000
[Wed Mar  7 13:10:24 2012] Offset between fit and detection position for source 4 = 0.024998 pixels
[Wed Mar  7 13:10:24 2012] 22222.190000 total counts/ 4560.890000 bgd. counts: snr = 261.515761
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.024998 pixels
  Position = (203.3, 316.3) = 17 43 54.83 -29 44 47.0
  Extent = 8.0 (7.9-8.1)", rotation angle = 0
  Source counts = 17661.3 +/- 149.1
  Background counts = 4560.9
  Rate = 2 +/- 0.01
[Wed Mar  7 13:10:24 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:24 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:10:24 2012] Source does appear to be extended
[Wed Mar  7 13:10:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 15:48:56 2012] Counts = 17661.300000, rescaling region sizes by 3.000000
[Wed Mar  7 15:48:56 2012] XMMSAS src. selection expression = ellipse(17640.899600, 27468.748600, 1437.762641, 1437.762641, 0.000000, X, Y)
[Wed Mar  7 15:48:56 2012] Writing source region out to fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar  7 15:48:56 2012] Extracting stamp from image fullrun_mos2_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (121, 234) - (286, 399)
[Wed Mar  7 15:48:56 2012] XMMSAS bgd. selection expression = annulus(17640.899600, 27468.748600, 7188.813207, 14377.626414, X, Y) && !ellipse(17257.420000, 28439.112000, 1662.776048, 1662.776048, 0.000000, X, Y) && !ellipse(11777.632800, 33447.547400, 378.032011, 378.032011, 0.000000, X, Y) && !ellipse(17009.524000, 25901.530000, 955.872028, 955.872028, 0.000000, X, Y) && !ellipse(17589.658000, 27141.220000, 2440.576070, 2071.136060, 211.436000, X, Y) && !ellipse(16607.650000, 26264.632000, 1662.776048, 1662.776048, 345.700000, X, Y) && !ellipse(20050.520000, 29267.998000, 1507.280043, 1507.280043, 0.000000, X, Y)
[Wed Mar  7 15:48:56 2012] Writing fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4.gif
[Wed Mar  7 15:49:05 2012] Mean detx,y = (-6900.11, -3863.38) 
[Wed Mar  7 15:49:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 15:56:28 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 15:56:29 2012] Setting source spectrum file to fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar  7 15:56:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar  7 16:41:51 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:51 2012] Error reading totcts from fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar  7 16:41:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:51 2012] Using photon index=1.80, rate=1.52, arf fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4.arf
[Wed Mar  7 16:41:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:51 2012] Updating source flux to 2e-11
[Wed Mar  7 16:42:44 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Wed Mar  7 16:46:53 2012] Reading fit data from xmm0112971801/analysis//spectral/fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_pl.csv
[Wed Mar  7 16:46:53 2012] Spectral fit parameter nH value = 1.44929e+23
[Wed Mar  7 16:46:53 2012] Spectral fit parameter PhoIndex value = 1.62806
[Wed Mar  7 16:46:53 2012] Failed to get F(0.3-8.0) from xmm0112971801/analysis//spectral/fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 16:46:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:46:53 2012] Using Nh = 1.4e+23, photon index=1.63, rate=1.52, arf fullrun_mos2_xmm0112971801_pi300-10000_pass1_cl_src4.arf
[Wed Mar  7 16:46:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:46:53 2012] Updating source flux to 7.3e-11