[Tue Mar  6 09:01:06 2012] Detection parameters:
  Position = (129.1, 395.5) = 17 44 19.55 -29 39 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.7 +/- 8.6
  Background counts = 7.0
  Rate = 0.002 +/- 0.0006

[Tue Mar  6 09:01:07 2012] Off-axis axis estimate = 14.15'
[Tue Mar  6 20:20:14 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 20:20:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 20:20:14 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Tue Mar  6 20:20:14 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.943
[Tue Mar  6 20:20:14 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.50"
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27.ximg exists
[Tue Mar  6 23:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27.csv
[Tue Mar  6 23:31:37 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Mar  6 23:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27.csv
[Tue Mar  6 23:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 23:31:38 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Mar  6 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Mar  6 23:31:38 2012] fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Mar  6 23:31:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Mar  6 23:31:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 23:32:15 2012] Source 27 is offset by 6.188674 and -2.536559 pixels which is larger than
2 X fitted extent = 1.506313 x 1.506313, not incorporating fit results
[Tue Mar  6 23:32:15 2012] Spatial fit model total counts = 62.048400, observed total counts = 105.000000
[Tue Mar  6 23:32:15 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar  6 23:32:15 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.417979 pixels away
[Tue Mar  6 23:32:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:15 2012] Assessing source extent using major
[Tue Mar  6 23:32:15 2012] Source does appear to be extended
[Tue Mar  6 23:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:15 2012] Deleting source due to low Poisson probability 0.9