[Tue Mar  6 09:00:42 2012] Detection parameters:
  Position = (187.9, 317.1) = 17 43 59.98 -29 44 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.9 +/- 17.2
  Background counts = 34.3
  Rate = 0.01 +/- 0.002

[Tue Mar  6 09:00:43 2012] Off-axis axis estimate = 8.13'
[Tue Mar  6 18:43:05 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:43:05 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Tue Mar  6 18:43:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Tue Mar  6 18:43:05 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.49"
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar  6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4.csv
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar  6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4.csv
[Tue Mar  6 20:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar  6 20:20:13 2012] Fit fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Mar  6 23:32:09 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Tue Mar  6 23:32:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:09 2012] Assessing source extent using major
[Tue Mar  6 23:32:09 2012] Source does appear to be extended
[Tue Mar  6 23:32:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:09 2012] Source is confused with source 5
[Tue Mar  6 23:32:09 2012] Source is confused with source 8
[Wed Mar  7 10:33:50 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 10:33:50 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Mar  7 10:33:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Wed Mar  7 10:33:50 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.49"
[Wed Mar  7 11:58:47 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar  7 11:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4.csv
[Wed Mar  7 11:58:47 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar  7 11:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4.csv
[Wed Mar  7 11:58:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar  7 11:58:48 2012] Fit fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Mar  7 13:10:20 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.403314 pixels away
[Wed Mar  7 13:10:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:20 2012] Assessing source extent using major
[Wed Mar  7 13:10:20 2012] Source does appear to be extended
[Wed Mar  7 13:10:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 15:15:41 2012] XMMSAS src. selection expression = ellipse(16297.401596, 27535.148956, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar  7 15:15:41 2012] Writing source region out to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7_src.reg
[Wed Mar  7 15:15:41 2012] Extracting stamp from image fullrun_mos1_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (150, 280) - (225, 355)
[Wed Mar  7 15:15:41 2012] XMMSAS bgd. selection expression = annulus(16297.401596, 27535.148956, 1087.500000, 2175.000000, X, Y) && !ellipse(17630.652435, 27447.602020, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(18255.148514, 27528.633514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16408.699097, 28034.859985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17391.372000, 24992.666000, 1592.288046, 1592.288046, 0.000000, X, Y) && !ellipse(15821.790000, 25596.564000, 1676.880048, 1676.880048, 0.000000, X, Y) && !ellipse(16011.932846, 27001.774811, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 15:15:41 2012] Writing fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7.gif
[Wed Mar  7 15:27:04 2012] Mean detx,y = (-3850.85, 7926.87) 
[Wed Mar  7 15:27:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 15:27:18 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 15:27:18 2012] Setting source spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar  7 15:27:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar  7 15:36:32 2012] Not generating rmf since there are only 94 counts
[Wed Mar  7 15:36:32 2012] rmf not generated due to insufficient counts
[Wed Mar  7 16:41:50 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:50 2012] Error reading totcts from fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar  7 16:41:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:51 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7.arf
[Wed Mar  7 16:41:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:51 2012] Updating source flux to 2.1e-13
[Wed Mar  7 16:41:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar  7 16:42:44 2012] xmm0112971801/analysis//spectral/fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete