[Tue Mar 6 09:00:42 2012] Detection parameters: Position = (189.2, 322.8) = 17 43 59.55 -29 44 16.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 84.7 +/- 16.0 Background counts = 30.2 Rate = 0.01 +/- 0.002 [Tue Mar 6 09:00:43 2012] Off-axis axis estimate = 8.12' [Tue Mar 6 18:43:05 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 18:43:05 2012] Initial guess for spatial extent in simple fitting = 10.49" [Tue Mar 6 18:43:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062 [Tue Mar 6 18:43:05 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.49" [Tue Mar 6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5.ximg exists [Tue Mar 6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5.csv [Tue Mar 6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5_1.ximg exists [Tue Mar 6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5.csv [Tue Mar 6 20:20:13 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Tue Mar 6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Tue Mar 6 20:20:13 2012] Fit fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Tue Mar 6 23:32:09 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.070324 pixels away [Tue Mar 6 23:32:09 2012] Source 5 is offset by -4.565344 and 1.068689 pixels which is larger than 2 X fitted extent = 1.216069 x 1.216069, not incorporating fit results [Tue Mar 6 23:32:09 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 23:32:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 23:32:09 2012] Assessing source extent using major [Tue Mar 6 23:32:09 2012] Source does appear to be extended [Tue Mar 6 23:32:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 23:32:09 2012] Source is confused with source 7 [Wed Mar 7 10:33:50 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting [Wed Mar 7 10:33:50 2012] Initial guess for spatial extent in simple fitting = 10.49" [Wed Mar 7 10:33:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062 [Wed Mar 7 10:33:50 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.49" [Wed Mar 7 11:58:47 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5.ximg exists [Wed Mar 7 11:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5.csv [Wed Mar 7 11:58:47 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5_1.ximg exists [Wed Mar 7 11:58:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5.csv [Wed Mar 7 11:58:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed Mar 7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed Mar 7 11:58:48 2012] Fit fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Wed Mar 7 13:10:20 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.074252 pixels away [Wed Mar 7 13:10:20 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 13:10:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 13:10:20 2012] Assessing source extent using major [Wed Mar 7 13:10:20 2012] Source does appear to be extended [Wed Mar 7 13:10:20 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 15:15:41 2012] XMMSAS src. selection expression = ellipse(16408.699097, 28034.859985, 652.500000, 652.500000, 0.000000, X, Y) [Wed Mar 7 15:15:41 2012] Writing source region out to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5_src.reg [Wed Mar 7 15:15:41 2012] Extracting stamp from image fullrun_mos1_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (152, 285) - (227, 360) [Wed Mar 7 15:15:41 2012] XMMSAS bgd. selection expression = annulus(16408.699097, 28034.859985, 1087.500000, 2175.000000, X, Y) && !ellipse(17630.652435, 27447.602020, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(18255.148514, 27528.633514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16297.401596, 27535.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17391.372000, 24992.666000, 1592.288046, 1592.288046, 0.000000, X, Y) && !ellipse(15821.790000, 25596.564000, 1676.880048, 1676.880048, 0.000000, X, Y) && !ellipse(16011.932846, 27001.774811, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 7 15:15:41 2012] Writing fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5.gif [Wed Mar 7 15:27:24 2012] Mean detx,y = (-4280.90, 7765.93) [Wed Mar 7 15:27:26 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 7 15:27:45 2012] Binned source spectrum to 10 counts/bin [Wed Mar 7 15:27:45 2012] Setting source spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed Mar 7 15:27:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5_bgd.pi.gz [Wed Mar 7 15:36:40 2012] Not generating rmf since there are only 84 counts [Wed Mar 7 15:36:40 2012] rmf not generated due to insufficient counts [Wed Mar 7 16:41:50 2012] Updating aperture counts using extracted products [Wed Mar 7 16:41:50 2012] Error reading totcts from fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed Mar 7 16:41:51 2012] Calculating source flux in energy range 0.30-8.00 [Wed Mar 7 16:41:51 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5.arf [Wed Mar 7 16:41:51 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Mar 7 16:41:51 2012] Updating source flux to 1.6e-13 [Wed Mar 7 16:41:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Mar 7 16:42:44 2012] xmm0112971801/analysis//spectral/fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete