[Tue Mar  6 09:00:43 2012] Detection parameters:
  Position = (151.0, 416.9) = 17 44 12.26 -29 37 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.1 +/- 7.3
  Background counts = 3.4
  Rate = 0.002 +/- 0.0005

[Tue Mar  6 09:00:43 2012] Off-axis axis estimate = 13.71'
[Tue Mar  6 18:43:05 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 18:43:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 18:43:05 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Tue Mar  6 18:43:05 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.108
[Tue Mar  6 18:43:05 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.28"
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16.ximg exists
[Tue Mar  6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16.csv
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Mar  6 20:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16.csv
[Tue Mar  6 20:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Mar  6 20:20:13 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Mar  6 20:20:13 2012] Fit fullrun_mos1_xmm0112971801_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Mar  6 23:32:09 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.056222 pixels away
[Tue Mar  6 23:32:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 23:32:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 23:32:09 2012] Assessing source extent using major
[Tue Mar  6 23:32:09 2012] Source does appear to be extended
[Tue Mar  6 23:32:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 23:32:09 2012] Source is confused with source 19
[Wed Mar  7 10:33:50 2012] Using EEF radius (= 13.28 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 10:33:50 2012] Initial guess for spatial extent in simple fitting = 13.28"
[Wed Mar  7 10:33:50 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.108
[Wed Mar  7 10:33:50 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.28"
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14.ximg exists
[Wed Mar  7 11:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14.csv
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Mar  7 11:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14.csv
[Wed Mar  7 11:58:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Mar  7 11:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Mar  7 11:58:48 2012] fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Mar  7 11:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Mar  7 11:58:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971801_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 13:10:20 2012] Source 17 is offset by -5.047868 and -1.242812 pixels which is larger than
2 X fitted extent = 1.483448 x 1.483448, not incorporating fit results
[Wed Mar  7 13:10:20 2012] Warning, spatial fit 14 centroid is now closest to src. 18
[Wed Mar  7 13:10:20 2012] Spatial fit model total counts = 114.226000, observed total counts = 113.000000
[Wed Mar  7 13:10:20 2012] Offset between fit and detection position for source 17 = 2.934848 pixels
[Wed Mar  7 13:10:20 2012] Warning, changing simple spatial fit ID from 14 to 17
[Wed Mar  7 13:10:20 2012] 85.972100 total counts/ 54.526700 bgd. counts: snr = 4.258459
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.934848 pixels
  Position = (153.9, 417.3) = 17 44 11.29 -29 37 27.3
  Extent = 26.2 (17.8-52.4)" x 4.3 (3.3-7.8)", rotation angle = 342 (335-351) degrees
  Source counts = 31.4 +/- 9.3
  Background counts = 54.5
  Rate = 0.003 +/- 0.0008
[Wed Mar  7 13:10:20 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:10:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:10:20 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:10:20 2012] Source does appear to be extended
[Wed Mar  7 13:10:20 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.27
[Wed Mar  7 13:10:20 2012] Source is asymmetric
[Wed Mar  7 15:15:41 2012] XMMSAS src. selection expression = ellipse(13337.248800, 36257.364000, 1573.308045, 256.545007, 342.183600, X, Y)
[Wed Mar  7 15:15:41 2012] Writing source region out to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17_src.reg
[Wed Mar  7 15:15:41 2012] Extracting stamp from image fullrun_mos1_xmm0112971801_pi300-10000_cl_sm2.00.img.gz, (63, 327) - (244, 508)
[Wed Mar  7 15:15:41 2012] XMMSAS bgd. selection expression = annulus(13337.248800, 36257.364000, 2622.180075, 5244.360151, X, Y) && !ellipse(11757.544434, 33422.787933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14393.360611, 36315.447662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13848.065384, 35716.066833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16264.478000, 36336.786600, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(13218.996017, 35713.656067, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 15:15:41 2012] Writing fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17.gif
[Wed Mar  7 15:31:47 2012] Mean detx,y = (-11590.20, 9649.76) 
[Wed Mar  7 15:31:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 15:32:44 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 15:32:44 2012] Setting source spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Mar  7 15:32:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Mar  7 15:47:44 2012] Not generating rmf since there are only 31 counts
[Wed Mar  7 15:47:44 2012] rmf not generated due to insufficient counts
[Wed Mar  7 16:41:50 2012] Updating aperture counts using extracted products
[Wed Mar  7 16:41:50 2012] Error reading totcts from fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Mar  7 16:41:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 16:41:51 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0112971801_pi300-10000_pass1_cl_src17.arf
[Wed Mar  7 16:41:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 16:41:51 2012] Updating source flux to 9.6e-14
[Wed Mar  7 16:41:54 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Wed Mar  7 16:41:54 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed Mar  7 16:41:54 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting