[Mon Jul  8 04:50:04 2013] Detection parameters:
  Position = (301.7, 395.7) = 18 1 15.89 -25 38 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.2 +/- 16.3
  Background counts = 76.5
  Rate = 0.01 +/- 0.002

[Mon Jul  8 04:50:04 2013] Off-axis axis estimate = 7.06'
[Mon Jul  8 04:58:03 2013] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 04:58:03 2013] Initial guess for spatial extent in simple fitting = 9.96"
[Mon Jul  8 04:58:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.804
[Mon Jul  8 04:58:03 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 9.96"
[Mon Jul  8 09:11:51 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36.ximg exists
[Mon Jul  8 09:11:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36.csv
[Mon Jul  8 09:11:51 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon Jul  8 09:11:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36.csv
[Mon Jul  8 09:11:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 09:11:53 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon Jul  8 09:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon Jul  8 09:11:53 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon Jul  8 09:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon Jul  8 09:11:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 13:04:43 2013] Spatial fit model total counts = 561.059000, observed total counts = 560.000000
[Mon Jul  8 13:04:43 2013] Offset between fit and detection position for source 89 = 1.131360 pixels
[Mon Jul  8 13:04:43 2013] Warning, changing simple spatial fit ID from 36 to 30
[Mon Jul  8 13:04:43 2013] 576.813400 total counts/ 541.069000 bgd. counts: snr = 1.536674
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 1.131360 pixels
  Position = (302.3, 394.8) = 18 1 15.70 -25 38 59.7
  Extent = 12.3 (6.2-20.4)" x 2.7 (2.6-3.0)", rotation angle = 360 (354-12) degrees
  Source counts = 35.7 +/- 24.0
  Background counts = 541.1
  Rate = 0.007 +/- 0.005
  Deleting source due to low Poisson probability