[Mon Jul  8 04:50:02 2013] Detection parameters:
  Position = (199.7, 459.9) = 18 1 48.68 -25 34 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 12.0
  Background counts = 32.3
  Rate = 0.006 +/- 0.001

[Mon Jul  8 04:50:04 2013] Off-axis axis estimate = 13.72'
[Mon Jul  8 04:58:03 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 04:58:03 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Mon Jul  8 04:58:03 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Mon Jul  8 04:58:03 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 13.29"
[Mon Jul  8 09:11:52 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98.ximg exists
[Mon Jul  8 09:11:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98.csv
[Mon Jul  8 09:11:52 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98_1.ximg exists
[Mon Jul  8 09:11:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98.csv
[Mon Jul  8 09:11:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 09:11:53 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Mon Jul  8 09:11:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98.csv
[Mon Jul  8 09:11:53 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Mon Jul  8 09:11:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98.csv
[Mon Jul  8 09:11:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 13:04:43 2013] Spatial fit model total counts = 315.314000, observed total counts = 298.000000
[Mon Jul  8 13:04:43 2013] Offset between fit and detection position for source 33 = 0.484172 pixels
[Mon Jul  8 13:04:43 2013] Warning, changing simple spatial fit ID from 98 to 88
[Mon Jul  8 13:04:43 2013] 298.437000 total counts/ 158.347000 bgd. counts: snr = 11.132744
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.484172 pixels
  Position = (199.7, 459.5) = 18 1 48.69 -25 34 18.0
  Extent = 18.1 (11.9-26.1)", rotation angle = 0
  Source counts = 140.1 +/- 17.3
  Background counts = 158.3
  Rate = 0.03 +/- 0.004
[Mon Jul  8 13:04:43 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 13:04:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 13:04:43 2013] Assessing source extent using major axis lower bound
[Mon Jul  8 13:04:43 2013] Source does appear to be extended
[Mon Jul  8 13:04:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 13:04:43 2013] Source is confused with source 39
[Mon Jul  8 13:08:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  8 13:08:12 2013] Initial guess for spatial extent in simple fitting = 18.11"
[Mon Jul  8 13:08:12 2013] source mask rpix=4.2, npix_max = 86, mask sum = 72, frac = 0.828
[Mon Jul  8 13:08:12 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 18.11"
[Mon Jul  8 17:20:59 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93.ximg exists
[Mon Jul  8 17:20:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93.csv
[Mon Jul  8 17:20:59 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93_1.ximg exists
[Mon Jul  8 17:20:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93.csv
[Mon Jul  8 17:20:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 17:21:00 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Mon Jul  8 17:21:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93.csv
[Mon Jul  8 17:21:00 2013] fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Mon Jul  8 17:21:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93.csv
[Mon Jul  8 17:21:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112971301_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 22:19:12 2013] Spatial fit model total counts = 315.585000, observed total counts = 298.000000
[Mon Jul  8 22:19:13 2013] Offset between fit and detection position for source 33 = 0.235849 pixels
[Mon Jul  8 22:19:13 2013] Warning, changing simple spatial fit ID from 93 to 83
[Mon Jul  8 22:19:13 2013] 285.925000 total counts/ 154.265000 bgd. counts: snr = 10.600349
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.235849 pixels
  Position = (199.6, 459.7) = 18 1 48.73 -25 34 17.2
  Extent = 17.8 (11.5-26.1)", rotation angle = 0
  Source counts = 131.7 +/- 16.9
  Background counts = 154.3
  Rate = 0.03 +/- 0.003
[Mon Jul  8 22:19:14 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 22:19:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 22:19:14 2013] Assessing source extent using major axis lower bound
[Mon Jul  8 22:19:14 2013] Source does appear to be extended
[Mon Jul  8 22:19:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 22:31:18 2013] XMMSAS src. selection expression = ellipse(17313.658000, 39941.830000, 1070.820031, 1070.820031, 0.000000, X, Y)
[Mon Jul  8 22:31:18 2013] Writing source region out to fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_src.reg
[Mon Jul  8 22:31:18 2013] Extracting stamp from image fullrun_mos1_xmm0112971301_pi300-10000_cl_sm2.00.img.gz, (138, 398) - (261, 521)
[Mon Jul  8 22:31:18 2013] XMMSAS bgd. selection expression = annulus(17313.658000, 39941.830000, 1784.700051, 3569.400103, X, Y) && !ellipse(21799.634000, 36297.868920, 1018.888029, 153.854404, 27.136400, X, Y) && !ellipse(14647.978200, 35026.439600, 2780.056080, 1037.176030, 311.966500, X, Y) && !ellipse(15004.647919, 36150.166779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18779.856000, 35794.872600, 1656.800048, 639.007218, 32.761200, X, Y) && !ellipse(17574.202530, 39479.244293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16423.811523, 38323.175507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19108.152344, 35655.080811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20937.682587, 40365.631134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15444.272980, 36524.454224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20583.447250, 40672.860504, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  8 22:31:18 2013] Writing fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33.gif
[Mon Jul  8 22:52:46 2013] Mean detx,y = (12552.60, -9559.13) 
[Mon Jul  8 22:52:47 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  8 22:53:08 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  8 22:53:08 2013] Setting source spectrum file to fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Jul  8 22:53:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jul  9 02:55:39 2013] Updating aperture counts using extracted products
[Tue Jul  9 02:55:39 2013] Total counts from fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 292.00
[Tue Jul  9 02:55:40 2013] Total counts from fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1412.00
[Tue Jul  9 02:55:40 2013] Got source and background scale factors 2337806.000000, 11434815.000000
[Tue Jul  9 02:55:40 2013] User source parameters:
  Position = (199.6, 459.7) = 18 1 48.73 -25 34 17.2
  Extent = 17.8 (11.5-26.1)", rotation angle = 0
  Source aperture counts = 3.3 +/- 18.1
  Background aperture counts = 288.7
  Rate = 0.0007 +/- 0.004

[Tue Jul  9 02:56:09 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul  9 02:56:09 2013] Using photon index=1.80, rate=0.0269, arf fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33.arf
[Tue Jul  9 02:56:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  9 02:56:09 2013] Updating source flux to 1.3e-12
[Tue Jul  9 02:58:15 2013] Flag c found in src. 33 procflags, skipping spectral fitting
[Tue Jul  9 02:58:59 2013] xmm0112971301/analysis//spectral/fullrun_mos1_xmm0112971301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete