[Fri Jul 20 13:03:08 2012] Detection parameters:
  Position = (304.0, 334.3) = 17 46 42.02 -29 11 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.0 +/- 15.3
  Background counts = 32.3
  Rate = 0.01 +/- 0.002

[Fri Jul 20 13:03:08 2012] Off-axis axis estimate = 2.63'
[Fri Jul 20 13:05:17 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:05:17 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Fri Jul 20 13:05:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Fri Jul 20 13:05:17 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.75"
[Fri Jul 20 13:20:11 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jul 20 13:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7.csv
[Fri Jul 20 13:20:11 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jul 20 13:20:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7.csv
[Fri Jul 20 13:20:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:20:11 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 20 13:20:11 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 20 13:20:11 2012] Fit fullrun_pn_xmm0112971001_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 20 13:37:41 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.582367 pixels away
[Fri Jul 20 13:37:41 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:37:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:37:41 2012] Assessing source extent using major
[Fri Jul 20 13:37:41 2012] Source does appear to be extended
[Fri Jul 20 13:37:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 13:37:49 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:37:49 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Fri Jul 20 13:37:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Fri Jul 20 13:37:49 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.75"
[Fri Jul 20 13:52:54 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 20 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7.csv
[Fri Jul 20 13:52:54 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 20 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7.csv
[Fri Jul 20 13:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:52:54 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 20 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 20 13:52:54 2012] fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 20 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 20 13:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112971001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:08:54 2012] Spatial fit model total counts = 405.122000, observed total counts = 349.000000
[Fri Jul 20 14:08:54 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 14:08:54 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:08:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:08:54 2012] Assessing source extent using major
[Fri Jul 20 14:08:54 2012] Source does appear to be extended
[Fri Jul 20 14:08:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:09:02 2012] XMMSAS src. selection expression = ellipse(26403.671051, 29037.436218, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 14:09:02 2012] Writing source region out to fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8_src.reg
[Fri Jul 20 14:09:02 2012] Extracting stamp from image fullrun_pn_xmm0112971001_pi300-10000_cl_sm2.00.img.gz, (267, 297) - (342, 372)
[Fri Jul 20 14:09:02 2012] XMMSAS bgd. selection expression = annulus(26403.671051, 29037.436218, 1087.500000, 2175.000000, X, Y)
[Fri Jul 20 14:09:02 2012] Writing fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8.gif
[Fri Jul 20 14:12:25 2012] Mean detx,y = (-398.54, -1684.22) 
[Fri Jul 20 14:12:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:12:57 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:12:57 2012] Setting source spectrum file to fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jul 20 14:12:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jul 20 14:15:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 14:15:34 2012] rmf not generated due to insufficient counts
[Fri Jul 20 14:48:08 2012] Updating aperture counts using extracted products
[Fri Jul 20 14:48:08 2012] Error reading totcts from fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jul 20 14:48:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 14:48:08 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8.arf
[Fri Jul 20 14:48:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 14:48:08 2012] Updating source flux to 4.4e-14
[Fri Jul 20 14:48:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 20 14:48:54 2012] xmm0112971001/analysis//spectral/fullrun_pn_xmm0112971001_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete