[Fri Jun 14 21:30:42 2013] Detection parameters:
  Position = (337.9, 176.9) = 17 43 54.79 -29 44 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97260.2 +/- 376.5
  Background counts = 87.4
  Rate = 5 +/- 0.02

[Fri Jun 14 21:30:43 2013] Off-axis axis estimate = 9.26'
[Fri Jun 14 21:30:58 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:30:58 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Fri Jun 14 21:30:58 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Fri Jun 14 21:30:58 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.06"
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 14 21:30:59 2013] Fit fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 14 21:31:08 2013] Spatial fit model total counts = 73761.800000, observed total counts = 73762.000000
[Fri Jun 14 21:31:08 2013] Offset between fit and detection position for source 6 = 0.093571 pixels
[Fri Jun 14 21:31:08 2013] 73773.260000 total counts/ 5343.860000 bgd. counts: snr = 936.084806
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.093571 pixels
  Position = (338.0, 177.0) = 17 43 54.77 -29 44 42.9
  Extent = 11.8 (11.8-11.8)", rotation angle = 0
  Source counts = 68429.4 +/- 271.6
  Background counts = 5343.9
  Rate = 5 +/- 0.02
[Fri Jun 14 21:31:08 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:08 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:08 2013] Source does appear to be extended
[Fri Jun 14 21:31:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:19 2013] Initial guess for spatial extent in simple fitting = 11.78"
[Fri Jun 14 21:31:19 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.875
[Fri Jun 14 21:31:19 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.78"
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 21:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 21:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:27 2013] Warning, spatial fit 5 centroid is now closest to src. 5
[Fri Jun 14 21:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:27 2013] Source does appear to be extended
[Fri Jun 14 21:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:35 2013] Counts = 68429.400000, rescaling region sizes by 3.000000
[Fri Jun 14 21:31:35 2013] XMMSAS src. selection expression = ellipse(29353.732180, 15352.142000, 2120.264967, 2120.264967, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Not overwriting source region fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 14 21:31:35 2013] Extracting stamp from image fullrun_pn_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (216, 55) - (460, 299)
[Fri Jun 14 21:31:35 2013] XMMSAS bgd. selection expression = annulus(29353.732180, 15352.142000, 10601.324837, 21202.649674, X, Y) && !ellipse(23329.354218, 21503.474640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23638.728851, 21272.368942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.104000, 15750.332200, 1535.240044, 1535.240044, 0.000000, X, Y) && !ellipse(31484.595306, 15093.801147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36991.874786, 28569.601471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29374.425812, 27915.861572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.923300, 27365.095140, 1223.024035, 1223.024035, 0.000000, X, Y) && !ellipse(28984.456509, 20017.555503, 1466.128042, 466.842744, 86.457012, X, Y) && !ellipse(29078.053400, 18645.938000, 1350.616039, 1350.616039, 0.000000, X, Y) && !ellipse(33884.887817, 18275.472763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.870972, 18228.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.112000, 17619.050000, 1637.600047, 1637.600047, 0.000000, X, Y) && !ellipse(26787.875031, 16546.661057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23490.586182, 15566.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32054.518585, 15257.568665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.389771, 13959.174377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34391.955933, 35802.841156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28638.751709, 28057.953430, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Writing fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6.gif
[Fri Jun 14 21:32:05 2013] Mean detx,y = (1630.43, 12231.15) 
[Fri Jun 14 21:32:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:39:44 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:39:45 2013] Setting source spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 14 21:39:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 14 22:38:49 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:49 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 91980.00
[Fri Jun 14 22:38:50 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_bgd.pi.gz = 40577.00
[Fri Jun 14 22:38:50 2013] Got source and background scale factors 13016660.000000, 357536561.000000
[Fri Jun 14 22:38:50 2013] User source parameters:
  Position = (338.0, 177.0) = 17 43 54.77 -29 44 42.9
  Extent = 11.8 (11.8-11.8)", rotation angle = 0
  Source aperture counts = 90502.7 +/- 304.3
  Background aperture counts = 1477.3
  Rate = 7 +/- 0.02

[Fri Jun 14 22:38:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:52 2013] Using photon index=1.80, rate=5.09, arf fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6.arf
[Fri Jun 14 22:38:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:52 2013] Updating source flux to 5.4e-11
[Fri Jun 14 22:39:05 2013] xmm0112970801/analysis//spectral/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete