[Fri Jun 14 21:30:42 2013] Detection parameters:
  Position = (299.8, 181.0) = 17 44 7.51 -29 44 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.8 +/- 20.6
  Background counts = 92.3
  Rate = 0.007 +/- 0.001

[Fri Jun 14 21:30:43 2013] Off-axis axis estimate = 8.51'
[Fri Jun 14 21:30:58 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:30:58 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Fri Jun 14 21:30:58 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Fri Jun 14 21:30:58 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.69"
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:08 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.077678 pixels away
[Fri Jun 14 21:31:08 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:08 2013] Assessing source extent using major
[Fri Jun 14 21:31:08 2013] Source does appear to be extended
[Fri Jun 14 21:31:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:19 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:19 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Fri Jun 14 21:31:19 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Fri Jun 14 21:31:19 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.69"
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 21:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 21:31:20 2013] Fit fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 21:31:27 2013] Spatial fit model total counts = 786.175000, observed total counts = 728.000000
[Fri Jun 14 21:31:27 2013] Offset between fit and detection position for source 4 = 2.148740 pixels
[Fri Jun 14 21:31:27 2013] 792.282000 total counts/ 512.055000 bgd. counts: snr = 12.383736
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.148740 pixels
  Position = (301.9, 181.6) = 17 44 6.82 -29 44 23.1
  Extent = 19.2 (14.8-21.4)", rotation angle = 0
  Source counts = 280.2 +/- 28.1
  Background counts = 512.1
  Rate = 0.02 +/- 0.002
[Fri Jun 14 21:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:27 2013] Source does appear to be extended
[Fri Jun 14 21:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:27 2013] Source is confused with source 19
[Fri Jun 14 21:31:35 2013] XMMSAS src. selection expression = ellipse(26215.104000, 15750.332200, 1151.430033, 1151.430033, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Not overwriting source region fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 14 21:31:35 2013] Extracting stamp from image fullrun_pn_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (236, 115) - (368, 248)
[Fri Jun 14 21:31:35 2013] XMMSAS bgd. selection expression = annulus(26215.104000, 15750.332200, 1919.050055, 3838.100110, X, Y) && !ellipse(29353.732180, 15352.142000, 2827.019957, 2827.019957, 0.000000, X, Y) && !ellipse(28984.456509, 20017.555503, 1466.128042, 466.842744, 86.457012, X, Y) && !ellipse(29078.053400, 18645.938000, 1350.616039, 1350.616039, 0.000000, X, Y) && !ellipse(29171.870972, 18228.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.112000, 17619.050000, 1637.600047, 1637.600047, 0.000000, X, Y) && !ellipse(26787.875031, 16546.661057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23490.586182, 15566.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.389771, 13959.174377, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Writing fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4.gif
[Fri Jun 14 21:31:35 2013] ../../xmm0112970801/products/events/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0112970801/products/events/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Jun 14 21:31:35 2013] Mean detx,y = (-1188.80, 11699.51) 
[Fri Jun 14 21:31:35 2013] ../../xmm0112970801/products/images/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.img and ../../xmm0112970801/products/images/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Jun 14 21:31:35 2013] ../../xmm0112970801/products/spectra/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.pi and ../../xmm0112970801/products/spectra/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Jun 14 21:31:35 2013] Setting source spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Jun 14 21:31:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 14 21:31:35 2013] ../../xmm0112970801/products/lightcurves/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0112970801/products/lightcurves/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Jun 14 22:38:49 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:49 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_src.pi.gz = 1812.00
[Fri Jun 14 22:38:49 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_bgd.pi.gz = 2120.00
[Fri Jun 14 22:38:49 2013] Got source and background scale factors 3687283.000000, 9972680.000000
[Fri Jun 14 22:38:49 2013] User source parameters:
  Position = (301.9, 181.6) = 17 44 6.82 -29 44 23.1
  Extent = 19.2 (14.8-21.4)", rotation angle = 0
  Source aperture counts = 1028.2 +/- 43.6
  Background aperture counts = 783.8
  Rate = 0.08 +/- 0.003

[Fri Jun 14 22:38:52 2013] No arf file for this source, not re-computing flux
[Fri Jun 14 22:39:00 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Jun 14 22:39:00 2013] Source 4 has no response, skipping
[Fri Jun 14 22:39:05 2013] xmm0112970801/analysis//spectral/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete