[Fri Jun 14 21:30:43 2013] Detection parameters:
  Position = (360.7, 202.5) = 17 43 47.18 -29 42 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 14.2
  Background counts = 102.1
  Rate = 0.003 +/- 0.0007

[Fri Jun 14 21:30:43 2013] Off-axis axis estimate = 8.29'
[Fri Jun 14 21:30:58 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:30:58 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Fri Jun 14 21:30:58 2013] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.524
[Fri Jun 14 21:30:58 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 10.57"
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun 14 21:31:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:08 2013] Spatial fit model total counts = 590.668000, observed total counts = 451.000000
[Fri Jun 14 21:31:08 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 21:31:08 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:08 2013] Assessing source extent using major
[Fri Jun 14 21:31:08 2013] Source does appear to be extended
[Fri Jun 14 21:31:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:08 2013] Deleting source due to low Poisson probability 0.9