[Fri Jun 14 21:30:43 2013] Detection parameters:
  Position = (311.2, 161.0) = 17 44 3.69 -29 45 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.8 +/- 19.0
  Background counts = 80.0
  Rate = 0.004 +/- 0.0009

[Fri Jun 14 21:30:43 2013] Off-axis axis estimate = 10.01'
[Fri Jun 14 21:30:58 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:30:58 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Fri Jun 14 21:30:58 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Fri Jun 14 21:30:58 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.43"
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Jun 14 21:31:00 2013] Fit fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Jun 14 21:31:08 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.013033 pixels away
[Fri Jun 14 21:31:08 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:08 2013] Assessing source extent using major
[Fri Jun 14 21:31:08 2013] Source does appear to be extended
[Fri Jun 14 21:31:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:19 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:19 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Fri Jun 14 21:31:19 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Fri Jun 14 21:31:19 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.43"
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jun 14 21:31:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 21:31:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:20 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jun 14 21:31:21 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jun 14 21:31:21 2013] Fit fullrun_pn_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Jun 14 21:31:27 2013] Source 23 is offset by -3.815520 and -7.615145 pixels which is larger than
2 X fitted extent = 1.421995 x 1.421995, not incorporating fit results
[Fri Jun 14 21:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:27 2013] Assessing source extent using major
[Fri Jun 14 21:31:27 2013] Source does appear to be extended
[Fri Jun 14 21:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:35 2013] XMMSAS src. selection expression = ellipse(27029.389771, 13959.174377, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Not overwriting source region fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 14 21:31:35 2013] Extracting stamp from image fullrun_pn_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (274, 124) - (349, 199)
[Fri Jun 14 21:31:35 2013] XMMSAS bgd. selection expression = annulus(27029.389771, 13959.174377, 1087.500000, 2175.000000, X, Y) && !ellipse(26215.104000, 15750.332200, 1535.240044, 1535.240044, 0.000000, X, Y) && !ellipse(29353.732180, 15352.142000, 2827.019957, 2827.019957, 0.000000, X, Y) && !ellipse(27754.112000, 17619.050000, 1637.600047, 1637.600047, 0.000000, X, Y) && !ellipse(26787.875031, 16546.661057, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:31:35 2013] Writing fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23.gif
[Fri Jun 14 21:45:52 2013] Mean detx,y = (-708.42, 13440.17) 
[Fri Jun 14 21:45:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:46:14 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:46:14 2013] Setting source spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 14 21:46:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 14 22:08:04 2013] Not generating rmf since there are only 87 counts
[Fri Jun 14 22:08:04 2013] rmf not generated due to insufficient counts
[Fri Jun 14 22:38:52 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:52 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 528.00
[Fri Jun 14 22:38:52 2013] Total counts from fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_bgd.pi.gz = 213.00
[Fri Jun 14 22:38:52 2013] Got source and background scale factors 1340800.000000, 0.000000
[Fri Jun 14 22:38:52 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri Jun 14 22:38:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:52 2013] Using photon index=1.80, rate=0.00439, arf fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23.arf
[Fri Jun 14 22:38:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:52 2013] Updating source flux to 6.4e-14
[Fri Jun 14 22:39:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 22:39:05 2013] xmm0112970801/analysis//spectral/fullrun_pn_xmm0112970801_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete