[Fri Jun 14 21:30:43 2013] Detection parameters:
  Position = (364.6, 162.0) = 17 43 45.87 -29 45 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.0 +/- 15.4
  Background counts = 72.8
  Rate = 0.003 +/- 0.0008

[Fri Jun 14 21:30:43 2013] Off-axis axis estimate = 11.00'
[Fri Jun 14 21:30:58 2013] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:30:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:30:58 2013] Initial guess for spatial extent in simple fitting = 11.93"
[Fri Jun 14 21:30:58 2013] source mask rpix=2.7, npix_max = 42, mask sum = 35, frac = 0.833
[Fri Jun 14 21:30:58 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 11.93"
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 21:30:59 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun 14 21:30:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 21:30:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 21:31:00 2013] fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 21:31:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:08 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.390324 pixels away
[Fri Jun 14 21:31:08 2013] Source 22 is offset by -7.153623 and 6.690042 pixels which is larger than
2 X fitted extent = 0.904864 x 0.904864, not incorporating fit results
[Fri Jun 14 21:31:08 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:08 2013] Assessing source extent using major
[Fri Jun 14 21:31:08 2013] Source does appear to be extended
[Fri Jun 14 21:31:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:08 2013] Deleting source due to low Poisson probability 0.9