[Fri Jun 14 21:30:44 2013] Detection parameters:
  Position = (337.8, 177.0) = 17 43 54.84 -29 44 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48477.2 +/- 262.2
  Background counts = 62.4
  Rate = 4 +/- 0.02

[Fri Jun 14 21:30:45 2013] Off-axis axis estimate = 9.25'
[Fri Jun 14 21:31:01 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:01 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Fri Jun 14 21:31:01 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Fri Jun 14 21:31:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.05"
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 21:31:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 21:31:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 21:31:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 21:31:01 2013] Fit fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 14 21:31:13 2013] Spatial fit model total counts = 51850.600000, observed total counts = 51908.000000
[Fri Jun 14 21:31:13 2013] Offset between fit and detection position for source 5 = 0.119881 pixels
[Fri Jun 14 21:31:13 2013] 51913.570000 total counts/ 9003.070000 bgd. counts: snr = 452.239260
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.119881 pixels
  Position = (337.8, 177.2) = 17 43 54.83 -29 44 42.3
  Extent = 10.6 (10.6-10.6)", rotation angle = 0
  Source counts = 42910.5 +/- 227.8
  Background counts = 9003.1
  Rate = 2 +/- 0.01
[Fri Jun 14 21:31:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:13 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:13 2013] Source does appear to be extended
[Fri Jun 14 21:31:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:21 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jun 14 21:31:21 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Fri Jun 14 21:31:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.64"
[Fri Jun 14 21:31:21 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 21:31:21 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 21:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:22 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 21:31:22 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 21:31:22 2013] Fit fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 21:31:29 2013] Spatial fit model total counts = 51160.400000, observed total counts = 51216.000000
[Fri Jun 14 21:31:29 2013] Offset between fit and detection position for source 5 = 0.011768 pixels
[Fri Jun 14 21:31:29 2013] 51166.480000 total counts/ 8048.480000 bgd. counts: snr = 480.619817
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.011768 pixels
  Position = (337.8, 177.2) = 17 43 54.83 -29 44 42.2
  Extent = 10.8 (10.8-10.8)", rotation angle = 0
  Source counts = 43118.0 +/- 226.2
  Background counts = 8048.5
  Rate = 2 +/- 0.01
[Fri Jun 14 21:31:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:29 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:29 2013] Source does appear to be extended
[Fri Jun 14 21:31:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:22:33 2013] Counts = 43118.000000, rescaling region sizes by 3.000000
[Fri Jun 14 22:22:33 2013] XMMSAS src. selection expression = ellipse(29337.938200, 15365.714800, 1947.996056, 1947.996056, 0.000000, X, Y)
[Fri Jun 14 22:22:33 2013] Writing source region out to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 14 22:22:33 2013] Extracting stamp from image fullrun_mos2_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (226, 65) - (450, 289)
[Fri Jun 14 22:22:33 2013] XMMSAS bgd. selection expression = annulus(29337.938200, 15365.714800, 9739.980280, 19479.960561, X, Y) && !ellipse(23494.372200, 21326.243600, 351.311210, 351.311210, 0.000000, X, Y) && !ellipse(31207.617340, 15893.205246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27562.660370, 14821.105743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.131348, 15519.347916, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:22:33 2013] Writing fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5.gif
[Fri Jun 14 22:22:40 2013] Mean detx,y = (-1608.79, -12347.92) 
[Fri Jun 14 22:22:43 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:28:09 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:28:09 2013] Setting source spectrum file to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 14 22:28:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 14 22:38:53 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 60100.00
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_bgd.pi.gz = 36845.00
[Fri Jun 14 22:38:53 2013] Got source and background scale factors 11525180.000000, 349839328.000000
[Fri Jun 14 22:38:53 2013] User source parameters:
  Position = (337.8, 177.2) = 17 43 54.83 -29 44 42.2
  Extent = 10.8 (10.8-10.8)", rotation angle = 0
  Source aperture counts = 58886.2 +/- 246.2
  Background aperture counts = 1213.8
  Rate = 3 +/- 0.01

[Fri Jun 14 22:38:54 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:54 2013] Using photon index=1.80, rate=1.95, arf fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5.arf
[Fri Jun 14 22:38:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:54 2013] Updating source flux to 5.5e-11
[Fri Jun 14 22:39:00 2013] xmm0112970801/analysis//spectral/fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete