[Fri Jun 14 21:30:44 2013] Detection parameters:
  Position = (359.3, 183.2) = 17 43 47.65 -29 44 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.9 +/- 21.7
  Background counts = 55.3
  Rate = 0.01 +/- 0.002

[Fri Jun 14 21:30:45 2013] Off-axis axis estimate = 9.44'
[Fri Jun 14 21:31:01 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:01 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Jun 14 21:31:01 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri Jun 14 21:31:01 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.15"
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 21:31:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 21:31:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 21:31:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 21:31:01 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 21:31:01 2013] Fit fullrun_mos2_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 14 21:31:13 2013] Source 2 is offset by 7.714475 and 2.316083 pixels which is larger than
2 X fitted extent = 1.924258 x 1.924258, not incorporating fit results
[Fri Jun 14 21:31:13 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.843456 pixels away
[Fri Jun 14 21:31:13 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:13 2013] Assessing source extent using major
[Fri Jun 14 21:31:13 2013] Source does appear to be extended
[Fri Jun 14 21:31:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:21 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:21 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Jun 14 21:31:21 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri Jun 14 21:31:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.15"
[Fri Jun 14 21:31:21 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 21:31:21 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 21:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:22 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 21:31:22 2013] fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 21:31:22 2013] Fit fullrun_mos2_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 21:31:29 2013] Warning, spatial fit 3 centroid is now closest to src. 8
[Fri Jun 14 21:31:29 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.843456 pixels away
[Fri Jun 14 21:31:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:29 2013] Assessing source extent using major
[Fri Jun 14 21:31:29 2013] Source does appear to be extended
[Fri Jun 14 21:31:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:22:33 2013] XMMSAS src. selection expression = ellipse(31207.617340, 15893.205246, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 22:22:33 2013] Writing source region out to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 14 22:22:33 2013] Extracting stamp from image fullrun_mos2_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (322, 146) - (397, 221)
[Fri Jun 14 22:22:33 2013] XMMSAS bgd. selection expression = annulus(31207.617340, 15893.205246, 1087.500000, 2175.000000, X, Y) && !ellipse(29337.938200, 15365.714800, 2597.328075, 2597.328075, 0.000000, X, Y)
[Fri Jun 14 22:22:33 2013] Writing fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2.gif
[Fri Jun 14 22:28:22 2013] Mean detx,y = (-3378.62, -11940.10) 
[Fri Jun 14 22:28:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:28:30 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:28:30 2013] Setting source spectrum file to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 14 22:28:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 14 22:38:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 22:38:00 2013] rmf not generated due to insufficient counts
[Fri Jun 14 22:38:53 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 986.00
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1450.00
[Fri Jun 14 22:38:53 2013] Got source and background scale factors 1328000.000000, 5447516.000000
[Fri Jun 14 22:38:53 2013] User source parameters:
  Position = (359.3, 183.2) = 17 43 47.65 -29 44 14.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 632.5 +/- 32.4
  Background aperture counts = 353.5
  Rate = 0.03 +/- 0.001

[Fri Jun 14 22:38:53 2013] Updating counts from extracted products
[Fri Jun 14 22:38:53 2013] Set source signif. to 632.52/18.80 = 33.64
[Fri Jun 14 22:38:54 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:54 2013] Using photon index=1.80, rate=0.0286, arf fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2.arf
[Fri Jun 14 22:38:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:54 2013] Updating source flux to 9.9e-13
[Fri Jun 14 22:38:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 22:39:00 2013] xmm0112970801/analysis//spectral/fullrun_mos2_xmm0112970801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete