[Fri Jun 14 21:30:44 2013] Detection parameters:
  Position = (270.6, 245.8) = 17 44 17.25 -29 39 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 562.2 +/- 29.5
  Background counts = 32.1
  Rate = 0.03 +/- 0.002

[Fri Jun 14 21:30:44 2013] Off-axis axis estimate = 4.32'
[Fri Jun 14 21:31:00 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:00 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Fri Jun 14 21:31:00 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.021
[Fri Jun 14 21:31:00 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.59"
[Fri Jun 14 21:31:00 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 21:31:00 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 21:31:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:01 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 14 21:31:01 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 14 21:31:01 2013] Fit fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 14 21:31:10 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.916335 pixels away
[Fri Jun 14 21:31:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:10 2013] Assessing source extent using major
[Fri Jun 14 21:31:10 2013] Source does appear to be extended
[Fri Jun 14 21:31:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:21 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:21 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Fri Jun 14 21:31:21 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.021
[Fri Jun 14 21:31:21 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.59"
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2.csv
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2.csv
[Fri Jun 14 21:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 14 21:31:21 2013] Fit fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 14 21:31:27 2013] Spatial fit model total counts = 686.662000, observed total counts = 690.000000
[Fri Jun 14 21:31:27 2013] Offset between fit and detection position for source 3 = 0.148765 pixels
[Fri Jun 14 21:31:27 2013] 693.872000 total counts/ 337.612000 bgd. counts: snr = 19.389121
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.148765 pixels
  Position = (270.7, 245.6) = 17 44 17.24 -29 39 44.6
  Extent = 5.4 (4.9-5.9)", rotation angle = 0
  Source counts = 356.3 +/- 26.3
  Background counts = 337.6
  Rate = 0.02 +/- 0.001
[Fri Jun 14 21:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:27 2013] Source does appear to be extended
[Fri Jun 14 21:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:09:25 2013] XMMSAS src. selection expression = ellipse(23498.671600, 21319.572600, 321.658809, 321.658809, 0.000000, X, Y)
[Fri Jun 14 22:09:25 2013] Writing source region out to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 14 22:09:25 2013] Extracting stamp from image fullrun_mos1_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (252, 227) - (289, 264)
[Fri Jun 14 22:09:25 2013] XMMSAS bgd. selection expression = annulus(23498.671600, 21319.572600, 536.098015, 1072.196031, X, Y)
[Fri Jun 14 22:09:25 2013] Writing fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3.gif
[Fri Jun 14 22:13:57 2013] Mean detx,y = (-5836.51, -4078.02) 
[Fri Jun 14 22:13:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:14:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:14:11 2013] Setting source spectrum file to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 14 22:14:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 14 22:38:53 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 414.00
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_bgd.pi.gz = 347.00
[Fri Jun 14 22:38:53 2013] Got source and background scale factors 324800.000000, 2568192.000000
[Fri Jun 14 22:38:53 2013] User source parameters:
  Position = (270.7, 245.6) = 17 44 17.24 -29 39 44.6
  Extent = 5.4 (4.9-5.9)", rotation angle = 0
  Source aperture counts = 370.1 +/- 21.4
  Background aperture counts = 43.9
  Rate = 0.02 +/- 0.001

[Fri Jun 14 22:38:53 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:53 2013] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3.arf
[Fri Jun 14 22:38:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:53 2013] Updating source flux to 4.9e-13
[Fri Jun 14 22:38:58 2013] xmm0112970801/analysis//spectral/fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete