[Fri Jun 14 21:30:43 2013] Detection parameters:
  Position = (338.0, 177.0) = 17 43 54.75 -29 44 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45546.8 +/- 256.2
  Background counts = 62.2
  Rate = 2 +/- 0.01

[Fri Jun 14 21:30:44 2013] Off-axis axis estimate = 9.26'
[Fri Jun 14 21:31:00 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:00 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Fri Jun 14 21:31:00 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Fri Jun 14 21:31:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.06"
[Fri Jun 14 21:31:00 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 21:31:00 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 21:31:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 21:31:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:00 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 21:31:01 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 21:31:01 2013] Fit fullrun_mos1_xmm0112970801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 14 21:31:10 2013] Spatial fit model total counts = 46941.500000, observed total counts = 47012.000000
[Fri Jun 14 21:31:10 2013] Offset between fit and detection position for source 1 = 0.314670 pixels
[Fri Jun 14 21:31:10 2013] 46493.250000 total counts/ 8042.050000 bgd. counts: snr = 428.772095
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.314670 pixels
  Position = (338.3, 177.1) = 17 43 54.65 -29 44 42.7
  Extent = 10.3 (10.3-10.3)", rotation angle = 0
  Source counts = 38451.2 +/- 215.6
  Background counts = 8042.1
  Rate = 2 +/- 0.01
[Fri Jun 14 21:31:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:10 2013] Source does appear to be extended
[Fri Jun 14 21:31:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:31:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:31:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 21:31:21 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Fri Jun 14 21:31:21 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Fri Jun 14 21:31:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.28"
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 21:31:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 21:31:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 21:31:21 2013] fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 21:31:21 2013] Fit fullrun_mos1_xmm0112970801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 21:31:27 2013] Spatial fit model total counts = 45759.900000, observed total counts = 45760.000000
[Fri Jun 14 21:31:27 2013] Offset between fit and detection position for source 1 = 0.048087 pixels
[Fri Jun 14 21:31:27 2013] 45983.300000 total counts/ 12128.900000 bgd. counts: snr = 307.400390
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048087 pixels
  Position = (338.3, 177.0) = 17 43 54.65 -29 44 42.9
  Extent = 7.8 (7.7-7.8)", rotation angle = 0
  Source counts = 33854.4 +/- 214.4
  Background counts = 12128.9
  Rate = 2 +/- 0.01
[Fri Jun 14 21:31:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 21:31:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 21:31:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 21:31:27 2013] Source does appear to be extended
[Fri Jun 14 21:31:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 22:09:25 2013] Counts = 33854.400000, rescaling region sizes by 3.000000
[Fri Jun 14 22:09:25 2013] XMMSAS src. selection expression = ellipse(29385.560200, 15353.364600, 1396.422040, 1396.422040, 0.000000, X, Y)
[Fri Jun 14 22:09:25 2013] Writing source region out to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 14 22:09:25 2013] Extracting stamp from image fullrun_mos1_xmm0112970801_pi300-10000_cl_sm2.00.img.gz, (258, 97) - (419, 257)
[Fri Jun 14 22:09:25 2013] XMMSAS bgd. selection expression = annulus(29385.560200, 15353.364600, 6982.110201, 13964.220402, X, Y) && !ellipse(23498.671600, 21319.572600, 428.878412, 428.878412, 0.000000, X, Y) && !ellipse(30852.926666, 15184.300476, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 22:09:25 2013] Writing fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1.gif
[Fri Jun 14 22:09:31 2013] Mean detx,y = (-12151.63, 1415.24) 
[Fri Jun 14 22:09:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:13:53 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:13:54 2013] Setting source spectrum file to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 14 22:13:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 14 22:38:53 2013] Updating aperture counts using extracted products
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 50818.00
[Fri Jun 14 22:38:53 2013] Total counts from fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 26057.00
[Fri Jun 14 22:38:53 2013] Got source and background scale factors 5879896.000000, 225550460.000000
[Fri Jun 14 22:38:53 2013] User source parameters:
  Position = (338.3, 177.0) = 17 43 54.65 -29 44 42.9
  Extent = 7.8 (7.7-7.8)", rotation angle = 0
  Source aperture counts = 50138.7 +/- 226.4
  Background aperture counts = 679.3
  Rate = 2 +/- 0.01

[Fri Jun 14 22:38:53 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 22:38:53 2013] Using photon index=1.80, rate=1.54, arf fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1.arf
[Fri Jun 14 22:38:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 22:38:53 2013] Updating source flux to 4.7e-11
[Fri Jun 14 22:38:58 2013] xmm0112970801/analysis//spectral/fullrun_mos1_xmm0112970801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete