[Wed Aug 15 22:20:18 2012] Detection parameters:
  Position = (141.3, 220.5) = 17 45 40.38 -29 27 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.1 +/- 9.9
  Background counts = 11.4
  Rate = 0.002 +/- 0.0004

[Wed Aug 15 22:20:18 2012] Off-axis axis estimate = 12.71'
[Wed Aug 15 23:15:35 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 23:15:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 23:15:35 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Wed Aug 15 23:15:35 2012] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.845
[Wed Aug 15 23:15:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.79"
[Wed Aug 15 23:36:48 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_src9.ximg exists
[Wed Aug 15 23:36:48 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Aug 15 23:36:48 2012] Fit fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Aug 15 23:36:48 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Aug 15 23:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Aug 15 23:36:48 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Aug 15 23:36:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Aug 15 23:36:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970701_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 23:51:50 2012] Spatial fit model total counts = 149.198000, observed total counts = 141.000000
[Wed Aug 15 23:51:50 2012] Offset between fit and detection position for source 3 = 2.749674 pixels
[Wed Aug 15 23:51:50 2012] 155.858700 total counts/ 91.221400 bgd. counts: snr = 6.767602
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.749674 pixels
  Position = (142.6, 218.1) = 17 45 39.96 -29 27 39.2
  Extent = 14.4" x 3.1", rotation angle = 65
  Source counts = 64.6 +/- 12.5
  Background counts = 91.2
  Rate = 0.003 +/- 0.0005
[Wed Aug 15 23:51:50 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:51:50 2012] Assessing source extent using major
[Wed Aug 15 23:51:50 2012] Source does appear to be extended
[Wed Aug 15 23:51:50 2012] Computing asymmetry using major and minor axis, asym = 4.68
[Wed Aug 15 23:51:50 2012] Source is asymmetric
[Thu Aug 16 00:46:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 00:46:32 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Thu Aug 16 00:46:32 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.956
[Thu Aug 16 00:46:32 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.72"
[Thu Aug 16 01:07:01 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9.ximg exists
[Thu Aug 16 01:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9.csv
[Thu Aug 16 01:07:01 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Aug 16 01:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9.csv
[Thu Aug 16 01:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 01:07:01 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Aug 16 01:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Aug 16 01:07:01 2012] fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Aug 16 01:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Aug 16 01:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 01:20:41 2012] Source 3 is offset by -3.969517 and 3.634322 pixels which is larger than
2 X fitted extent = 0.568239 x 0.568239, not incorporating fit results
[Thu Aug 16 01:20:41 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 01:20:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 01:20:41 2012] Assessing source extent using major
[Thu Aug 16 01:20:41 2012] Source does appear to be extended
[Thu Aug 16 01:20:41 2012] Computing asymmetry using major and minor axis, asym = 4.68
[Thu Aug 16 01:20:41 2012] Source is asymmetric
[Thu Aug 16 01:51:15 2012] XMMSAS src. selection expression = ellipse(12355.646000, 18925.192000, 862.224025, 184.341605, 65.475844, X, Y)
[Thu Aug 16 01:51:15 2012] Writing source region out to fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 16 01:51:15 2012] Extracting stamp from image fullrun_mos1_xmm0112970701_pi300-10000_cl_sm2.00.img.gz, (93, 169) - (192, 268)
[Thu Aug 16 01:51:15 2012] XMMSAS bgd. selection expression = annulus(12355.646000, 18925.192000, 1437.040041, 2874.080083, X, Y) && !ellipse(13811.372000, 19815.820400, 735.515221, 365.876011, 69.897900, X, Y) && !ellipse(12873.230000, 20989.864000, 1946.808056, 1946.808056, 0.000000, X, Y)
[Thu Aug 16 01:51:15 2012] Writing fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3.gif
[Thu Aug 16 01:53:22 2012] Mean detx,y = (-7770.91, -15156.21) 
[Thu Aug 16 01:53:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 01:53:43 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 01:53:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 01:53:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 16 01:55:50 2012] Not generating rmf since there are only 64 counts
[Thu Aug 16 01:55:50 2012] rmf not generated due to insufficient counts
[Thu Aug 16 02:04:45 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:04:45 2012] Error reading totcts from fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 02:04:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:04:46 2012] Using photon index=1.80, rate=0.00276, arf fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 02:04:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:04:46 2012] Updating source flux to 1.4e-13
[Thu Aug 16 02:04:47 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu Aug 16 02:04:47 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 16 02:04:49 2012] xmm0112970701/analysis//spectral/fullrun_mos1_xmm0112970701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete