[Fri Aug 10 22:33:40 2012] Detection parameters:
  Position = (325.7, 420.8) = 17 46 20.78 -28 43 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46647.3 +/- 257.7
  Background counts = 117.2
  Rate = 4 +/- 0.02

[Fri Aug 10 22:33:42 2012] Off-axis axis estimate = 9.09'
[Fri Aug 10 22:39:11 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 22:39:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 22:39:11 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Fri Aug 10 22:39:11 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Fri Aug 10 22:39:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.97"
[Sat Aug 11 00:39:12 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug 11 00:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2.csv
[Sat Aug 11 00:39:12 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug 11 00:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2.csv
[Sat Aug 11 00:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 00:39:13 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 11 00:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 00:39:13 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 11 00:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 00:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:01:20 2012] Warning, spatial fit 2 centroid is now closest to src. 19
[Sat Aug 11 04:01:20 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.021773 pixels away
[Sat Aug 11 04:01:20 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:01:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:01:20 2012] Assessing source extent using major
[Sat Aug 11 04:01:20 2012] Source does appear to be extended
[Sat Aug 11 04:01:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:01:58 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 04:01:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 04:01:58 2012] Initial guess for spatial extent in simple fitting = 10.97"
[Sat Aug 11 04:01:58 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Sat Aug 11 04:01:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.97"
[Sat Aug 11 05:51:28 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 11 05:51:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 05:51:28 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 11 05:51:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 05:51:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 05:51:29 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 11 05:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 05:51:29 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 11 05:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 05:51:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 09:21:09 2012] Warning, spatial fit 2 centroid is now closest to src. 12
[Sat Aug 11 09:21:09 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 09:21:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 09:21:09 2012] Assessing source extent using major
[Sat Aug 11 09:21:09 2012] Source does appear to be extended
[Sat Aug 11 09:21:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 09:21:31 2012] Counts = 46647.316406, rescaling region sizes by 3.000000
[Sat Aug 11 09:21:31 2012] XMMSAS src. selection expression = ellipse(28289.612701, 36559.559021, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Aug 11 09:21:31 2012] Writing source region out to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 11 09:21:31 2012] Extracting stamp from image fullrun_pn_xmm0112970501_pi300-10000_cl_sm2.00.img.gz, (213, 308) - (438, 533)
[Sat Aug 11 09:21:31 2012] XMMSAS bgd. selection expression = annulus(28289.612701, 36559.559021, 9787.500000, 19575.000000, X, Y) && !ellipse(23524.713928, 24380.167023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17354.410680, 25429.920800, 1595.476846, 1595.476846, 0.000000, X, Y) && !ellipse(36348.593048, 29866.734619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29835.992035, 29348.523346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.564000, 26244.166600, 482.089614, 482.089614, 0.000000, X, Y) && !ellipse(23818.946930, 24817.588409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37588.414734, 18803.773148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37539.148010, 18218.805145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37966.066101, 17092.597473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.129761, 36156.647705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16358.384964, 30125.751312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16330.580170, 25187.930481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30798.461395, 24469.267151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.034400, 24270.340000, 388.173611, 388.173611, 0.000000, X, Y) && !ellipse(23654.236877, 21586.881058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29750.069977, 36236.248138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35874.439331, 25170.104614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36214.694611, 23640.136017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.844960, 38246.118000, 1903.336055, 1903.336055, 0.000000, X, Y) && !ellipse(29918.905945, 36928.023987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.351746, 36654.394012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30531.824768, 35900.790497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17181.570160, 27514.121124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17636.131088, 27250.219177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39379.993988, 26706.864777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36265.535767, 25767.664093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27073.134033, 25272.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28056.664000, 25209.882000, 2354.152068, 2354.152068, 0.000000, X, Y) && !ellipse(23036.634583, 25037.945221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.351135, 24913.650024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.532400, 24256.586000, 1180.192034, 1180.192034, 0.000000, X, Y) && !ellipse(26831.326000, 23843.098000, 1206.232035, 1206.232035, 0.000000, X, Y) && !ellipse(27173.058716, 23507.780151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18073.163513, 23016.111206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.135200, 22737.996000, 1313.160038, 1313.160038, 0.000000, X, Y) && !ellipse(33285.373800, 21477.272000, 1606.368046, 1606.368046, 0.000000, X, Y) && !ellipse(34029.902863, 20374.141998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29299.312378, 18520.411163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27896.110809, 42292.800079, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 09:21:31 2012] Writing fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3.gif
[Sat Aug 11 09:29:40 2012] Mean detx,y = (1946.20, -8965.25) 
[Sat Aug 11 09:29:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 09:38:28 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 09:38:28 2012] Setting source spectrum file to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 09:38:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 11 10:06:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 11 10:06:25 2012] rmf not generated due to insufficient counts
[Sat Aug 11 13:28:56 2012] Updating aperture counts using extracted products
[Sat Aug 11 13:28:56 2012] Error reading totcts from fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 13:28:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 13:28:58 2012] Using photon index=1.80, rate=4.2, arf fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src3.arf
[Sat Aug 11 13:28:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 13:28:58 2012] Updating source flux to 1.5e-11
[Sat Aug 11 13:40:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting