[Fri Aug 10 22:33:41 2012] Detection parameters:
  Position = (344.5, 425.0) = 17 46 14.59 -28 43 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.5 +/- 18.8
  Background counts = 110.6
  Rate = 0.004 +/- 0.0009

[Fri Aug 10 22:33:42 2012] Off-axis axis estimate = 9.76'
[Fri Aug 10 22:39:11 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 22:39:11 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Fri Aug 10 22:39:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Fri Aug 10 22:39:11 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.31"
[Sat Aug 11 00:39:13 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20.ximg exists
[Sat Aug 11 00:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20.csv
[Sat Aug 11 00:39:13 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Aug 11 00:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20.csv
[Sat Aug 11 00:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 00:39:14 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Aug 11 00:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Aug 11 00:39:14 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Aug 11 00:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Aug 11 00:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:01:20 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.019553 pixels away
[Sat Aug 11 04:01:20 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:01:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:01:20 2012] Assessing source extent using major
[Sat Aug 11 04:01:20 2012] Source does appear to be extended
[Sat Aug 11 04:01:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:01:58 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 04:01:58 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Sat Aug 11 04:01:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Sat Aug 11 04:01:58 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.31"
[Sat Aug 11 05:51:28 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src19.ximg exists
[Sat Aug 11 05:51:28 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Aug 11 05:51:28 2012] Fit fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_src19 appears to have run properly
[Sat Aug 11 05:51:29 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Aug 11 05:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Aug 11 05:51:29 2012] fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Aug 11 05:51:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Aug 11 05:51:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 09:21:09 2012] Warning, spatial fit 19 centroid is now closest to src. 27
[Sat Aug 11 09:21:09 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 09:21:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 09:21:09 2012] Assessing source extent using major
[Sat Aug 11 09:21:09 2012] Source does appear to be extended
[Sat Aug 11 09:21:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 09:21:32 2012] XMMSAS src. selection expression = ellipse(29918.905945, 36928.023987, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 09:21:32 2012] Writing source region out to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25_src.reg
[Sat Aug 11 09:21:32 2012] Extracting stamp from image fullrun_pn_xmm0112970501_pi300-10000_cl_sm2.00.img.gz, (307, 388) - (382, 463)
[Sat Aug 11 09:21:32 2012] XMMSAS bgd. selection expression = annulus(29918.905945, 36928.023987, 1087.500000, 2175.000000, X, Y) && !ellipse(28289.612701, 36559.559021, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29750.069977, 36236.248138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.844960, 38246.118000, 1903.336055, 1903.336055, 0.000000, X, Y) && !ellipse(30531.824768, 35900.790497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 09:21:32 2012] Writing fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25.gif
[Sat Aug 11 09:49:01 2012] Mean detx,y = (3700.54, -9227.38) 
[Sat Aug 11 09:49:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 09:49:19 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 09:49:19 2012] Setting source spectrum file to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 11 09:49:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Aug 11 10:20:05 2012] Not generating rmf since there are only 83 counts
[Sat Aug 11 10:20:05 2012] rmf not generated due to insufficient counts
[Sat Aug 11 13:28:57 2012] Updating aperture counts using extracted products
[Sat Aug 11 13:28:57 2012] Error reading totcts from fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 11 13:28:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 13:28:59 2012] Using photon index=1.80, rate=0.00395, arf fullrun_pn_xmm0112970501_pi300-10000_pass1_cl_src25.arf
[Sat Aug 11 13:28:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 13:28:59 2012] Updating source flux to 2.1e-14
[Sat Aug 11 13:40:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting