[Fri Aug 10 22:34:46 2012] Detection parameters:
  Position = (270.6, 280.9) = 17 46 39.04 -28 53 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1108.5 +/- 41.9
  Background counts = 68.7
  Rate = 0.05 +/- 0.002

[Fri Aug 10 22:34:47 2012] Off-axis axis estimate = 2.39'
[Sat Aug 11 02:42:43 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 02:42:43 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sat Aug 11 02:42:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Sat Aug 11 02:42:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.62"
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 04:01:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 11 04:01:06 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 11 04:01:41 2012] Source 9 is offset by -6.446638 and 5.949873 pixels which is larger than
2 X fitted extent = 0.876041 x 0.876041, not incorporating fit results
[Sat Aug 11 04:01:41 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:01:41 2012] Assessing source extent using major
[Sat Aug 11 04:01:41 2012] Source does appear to be extended
[Sat Aug 11 04:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:01:41 2012] Source is confused with source 7
[Sat Aug 11 08:11:25 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 08:11:25 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sat Aug 11 08:11:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Sat Aug 11 08:11:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.62"
[Sat Aug 11 09:20:59 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 11 09:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 09:20:59 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 11 09:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 09:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 09:21:00 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 11 09:21:00 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 11 09:21:00 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 11 09:21:21 2012] Spatial fit model total counts = 1731.040000, observed total counts = 1731.000000
[Sat Aug 11 09:21:21 2012] Offset between fit and detection position for source 9 = 8.772693 pixels
[Sat Aug 11 09:21:21 2012] 1815.480029 total counts/ 1815.480000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.772693 pixels
  Position = (277.0, 275.0) = 17 46 36.91 -28 54 18.0
  Extent = 15.2 (1.9-28.6)", rotation angle = 0
  Source counts = 0.0 +/- 42.6
  Background counts = 1815.5
  Rate = 1e-09 +/- 0.002
  Deleting source due to low Poisson probability