[Fri Aug 10 22:34:45 2012] Detection parameters:
  Position = (273.7, 286.6) = 17 46 38.00 -28 53 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.9 +/- 22.9
  Background counts = 71.6
  Rate = 0.01 +/- 0.001

[Fri Aug 10 22:34:47 2012] Off-axis axis estimate = 1.99'
[Sat Aug 11 02:42:43 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 02:42:43 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sat Aug 11 02:42:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.027
[Sat Aug 11 02:42:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.42"
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8.csv
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8.csv
[Sat Aug 11 04:01:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Aug 11 04:01:06 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Aug 11 04:01:41 2012] Source 7 is offset by -4.261419 and -7.224944 pixels which is larger than
2 X fitted extent = 6.824920 x 6.824920, not incorporating fit results
[Sat Aug 11 04:01:41 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:01:41 2012] Assessing source extent using major
[Sat Aug 11 04:01:41 2012] Source does appear to be extended
[Sat Aug 11 04:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:01:41 2012] Source is confused with source 9
[Sat Aug 11 08:11:25 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 08:11:25 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sat Aug 11 08:11:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.027
[Sat Aug 11 08:11:25 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.42"
[Sat Aug 11 09:20:59 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src8.ximg exists
[Sat Aug 11 09:20:59 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Aug 11 09:20:59 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_src8 appears to have run properly
[Sat Aug 11 09:21:00 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Aug 11 09:21:00 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Aug 11 09:21:00 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Aug 11 09:21:21 2012] Source 7 is offset by -4.308362 and -7.179795 pixels which is larger than
2 X fitted extent = 6.824920 x 6.824920, not incorporating fit results
[Sat Aug 11 09:21:21 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 09:21:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 09:21:21 2012] Assessing source extent using major
[Sat Aug 11 09:21:21 2012] Source does appear to be extended
[Sat Aug 11 09:21:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 12:21:08 2012] XMMSAS src. selection expression = ellipse(23764.890533, 24885.697876, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 12:21:08 2012] Writing source region out to fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7_src.reg
[Sat Aug 11 12:21:08 2012] Extracting stamp from image fullrun_mos2_xmm0112970501_pi300-10000_cl_sm2.00.img.gz, (236, 249) - (311, 324)
[Sat Aug 11 12:21:08 2012] XMMSAS bgd. selection expression = annulus(23764.890533, 24885.697876, 1087.500000, 2175.000000, X, Y)
[Sat Aug 11 12:21:08 2012] Writing fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7.gif
[Sat Aug 11 12:33:27 2012] Mean detx,y = (3514.45, -2749.38) 
[Sat Aug 11 12:33:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 12:33:39 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 12:33:39 2012] Setting source spectrum file to fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Aug 11 12:33:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Aug 11 13:01:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 11 13:01:24 2012] rmf not generated due to insufficient counts
[Sat Aug 11 13:29:03 2012] Updating aperture counts using extracted products
[Sat Aug 11 13:29:03 2012] Error reading totcts from fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Aug 11 13:29:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 13:29:03 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0112970501_pi300-10000_pass1_cl_src7.arf
[Sat Aug 11 13:29:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 13:29:04 2012] Updating source flux to 1.1e-13
[Sat Aug 11 13:35:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting