[Fri Aug 10 22:34:47 2012] Detection parameters:
  Position = (311.0, 287.1) = 17 46 25.66 -28 53 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.7 +/- 20.0
  Background counts = 100.2
  Rate = 0.007 +/- 0.0009

[Fri Aug 10 22:34:47 2012] Off-axis axis estimate = 1.23'
[Sat Aug 11 02:42:43 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 02:42:43 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sat Aug 11 02:42:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.724
[Sat Aug 11 02:42:43 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.04"
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14.csv
[Sat Aug 11 04:01:05 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Aug 11 04:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14.csv
[Sat Aug 11 04:01:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Aug 11 04:01:06 2012] fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Aug 11 04:01:06 2012] Fit fullrun_mos2_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Aug 11 04:01:41 2012] Spatial fit model total counts = 1298.390000, observed total counts = 1329.000000
[Sat Aug 11 04:01:41 2012] Offset between fit and detection position for source 28 = 1.708855 pixels
[Sat Aug 11 04:01:41 2012] Warning, changing simple spatial fit ID from 14 to 11
[Sat Aug 11 04:01:41 2012] 1312.403600 total counts/ 1274.520000 bgd. counts: snr = 1.061153
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.708855 pixels
  Position = (312.7, 287.1) = 17 46 25.10 -28 53 25.2
  Extent = 5.7 (3.3-10.5)", rotation angle = 0
  Source counts = 37.9 +/- 36.2
  Background counts = 1274.5
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability