[Fri Aug 10 22:34:18 2012] Detection parameters:
  Position = (432.5, 216.0) = 17 45 45.38 -28 58 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.7 +/- 20.8
  Background counts = 64.0
  Rate = 0.007 +/- 0.0008

[Fri Aug 10 22:34:18 2012] Off-axis axis estimate = 11.41'
[Sat Aug 11 00:39:14 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 00:39:14 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Sat Aug 11 00:39:14 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.970
[Sat Aug 11 00:39:14 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.13"
[Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12.ximg exists
[Sat Aug 11 02:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12.csv
[Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Aug 11 02:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12.csv
[Sat Aug 11 02:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 02:42:43 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Aug 11 02:42:43 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Aug 11 02:42:43 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Aug 11 04:01:33 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 16.184588 pixels away
[Sat Aug 11 04:01:33 2012] Spatial fit model total counts = 1196.700000, observed total counts = 1195.000000
[Sat Aug 11 04:01:33 2012] Offset between fit and detection position for source 25 = 0.516331 pixels
[Sat Aug 11 04:01:33 2012] Warning, changing simple spatial fit ID from 12 to 20
[Sat Aug 11 04:01:33 2012] 1033.584900 total counts/ 954.403000 bgd. counts: snr = 2.563067
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.516331 pixels
  Position = (432.1, 216.4) = 17 45 45.49 -28 58 32.6
  Extent = 4.6 (3.5-7.1)", rotation angle = 0
  Source counts = 79.2 +/- 32.1
  Background counts = 954.4
  Rate = 0.003 +/- 0.001
[Sat Aug 11 04:01:33 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:01:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:01:33 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 04:01:33 2012] Source does appear to be extended
[Sat Aug 11 04:01:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:01:33 2012] Source is confused with source 26
[Sat Aug 11 05:51:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 05:51:29 2012] Initial guess for spatial extent in simple fitting = 4.63"
[Sat Aug 11 05:51:29 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.919
[Sat Aug 11 05:51:29 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 4.63"
[Sat Aug 11 08:11:24 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src12.ximg exists
[Sat Aug 11 08:11:24 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Aug 11 08:11:24 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Aug 11 08:11:25 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Aug 11 08:11:25 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Aug 11 08:11:25 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Aug 11 09:21:16 2012] Spatial fit model total counts = 907.953000, observed total counts = 907.000000
[Sat Aug 11 09:21:16 2012] Offset between fit and detection position for source 25 = 0.431921 pixels
[Sat Aug 11 09:21:16 2012] 895.975300 total counts/ 821.073000 bgd. counts: snr = 2.613992
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.431921 pixels
  Position = (432.3, 216.7) = 17 45 45.43 -28 58 30.9
  Extent = 7.2 (4.8-9.3)" x 2.3 (1.6-3.3)", rotation angle = 326 (313-336) degrees
  Source counts = 74.9 +/- 29.9
  Background counts = 821.1
  Rate = 0.003 +/- 0.001
[Sat Aug 11 09:21:16 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 09:21:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 09:21:16 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 09:21:16 2012] Source does appear to be extended
[Sat Aug 11 09:21:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.44
[Sat Aug 11 10:53:49 2012] XMMSAS src. selection expression = ellipse(37564.059800, 18807.778400, 433.098012, 135.958204, 325.886700, X, Y)
[Sat Aug 11 10:53:49 2012] Writing source region out to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25_src.reg
[Sat Aug 11 10:53:49 2012] Extracting stamp from image fullrun_mos1_xmm0112970501_pi300-10000_cl_sm2.00.img.gz, (407, 192) - (457, 242)
[Sat Aug 11 10:53:49 2012] XMMSAS bgd. selection expression = annulus(37564.059800, 18807.778400, 721.830021, 1443.660042, X, Y) && !ellipse(37958.262560, 17105.556200, 1140.176033, 1140.176033, 0.000000, X, Y) && !ellipse(38314.907745, 16650.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37691.174000, 16915.152000, 2028.120058, 2028.120058, 0.000000, X, Y) && !ellipse(37519.782227, 18387.521637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35767.444305, 20857.140945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39863.456238, 16571.729843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38731.946472, 17609.783905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39583.732971, 17222.432388, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 10:53:49 2012] Writing fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25.gif
[Sat Aug 11 11:06:40 2012] Mean detx,y = (-9207.12, 9843.46) 
[Sat Aug 11 11:06:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 11:06:57 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 11:06:58 2012] Setting source spectrum file to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 11 11:06:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Aug 11 11:55:59 2012] Not generating rmf since there are only 74 counts
[Sat Aug 11 11:55:59 2012] rmf not generated due to insufficient counts
[Sat Aug 11 13:29:00 2012] Updating aperture counts using extracted products
[Sat Aug 11 13:29:00 2012] Error reading totcts from fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug 11 13:29:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 13:29:02 2012] Using photon index=1.80, rate=0.00312, arf fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src25.arf
[Sat Aug 11 13:29:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 13:29:02 2012] Updating source flux to 9.9e-14
[Sat Aug 11 13:29:06 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Sat Aug 11 13:29:06 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting