[Fri Aug 10 22:34:17 2012] Detection parameters: Position = (325.4, 420.7) = 17 46 20.89 -28 43 44.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 24395.2 +/- 185.6 Background counts = 55.0 Rate = 2 +/- 0.01 [Fri Aug 10 22:34:18 2012] Off-axis axis estimate = 9.08' [Sat Aug 11 00:39:14 2012] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting [Sat Aug 11 00:39:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 11 00:39:14 2012] Initial guess for spatial extent in simple fitting = 10.97" [Sat Aug 11 00:39:14 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986 [Sat Aug 11 00:39:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.97" [Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src1.ximg exists [Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Aug 11 02:42:42 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_src1 appears to have run properly [Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Aug 11 02:42:42 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Aug 11 02:42:42 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Aug 11 04:01:33 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.166818 pixels away [Sat Aug 11 04:01:33 2012] Spatial fit model total counts = 1234.340000, observed total counts = 1250.000000 [Sat Aug 11 04:01:33 2012] Offset between fit and detection position for source 2 = 6.232109 pixels [Sat Aug 11 04:01:33 2012] Warning, changing simple spatial fit ID from 1 to 14 [Sat Aug 11 04:01:33 2012] 1250.289000 total counts/ 913.733000 bgd. counts: snr = 11.133909 Spatial fit parameters: Offset between fit and detection position for source 2 = 6.232109 pixels Position = (324.5, 414.6) = 17 46 21.19 -28 44 10.7 Extent = 20.8 (20.8-41.7)", rotation angle = 0 Source counts = 336.6 +/- 35.4 Background counts = 913.7 Rate = 0.01 +/- 0.001 [Sat Aug 11 04:01:33 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 04:01:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 04:01:33 2012] Assessing source extent using major axis lower bound [Sat Aug 11 04:01:33 2012] Source does appear to be extended [Sat Aug 11 04:01:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 04:01:33 2012] Source is confused with source 5 [Sat Aug 11 05:51:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Aug 11 05:51:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 11 05:51:29 2012] Initial guess for spatial extent in simple fitting = 20.84" [Sat Aug 11 05:51:29 2012] source mask rpix=4.8, npix_max = 111, mask sum = 121, frac = 1.080 [Sat Aug 11 05:51:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 20.84" [Sat Aug 11 08:11:24 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1.ximg exists [Sat Aug 11 08:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1.csv [Sat Aug 11 08:11:24 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Aug 11 08:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1.csv [Sat Aug 11 08:11:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 11 08:11:25 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Aug 11 08:11:25 2012] fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Aug 11 08:11:25 2012] Fit fullrun_mos1_xmm0112970501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Aug 11 09:21:16 2012] Warning, spatial fit 1 centroid is now closest to src. 5 [Sat Aug 11 09:21:16 2012] Spatial fit model total counts = 1228.190000, observed total counts = 1250.000000 [Sat Aug 11 09:21:16 2012] Offset between fit and detection position for source 2 = 0.492391 pixels [Sat Aug 11 09:21:16 2012] Warning, changing simple spatial fit ID from 1 to 14 [Sat Aug 11 09:21:16 2012] 1151.063000 total counts/ 787.095000 bgd. counts: snr = 12.973275 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.492391 pixels Position = (324.0, 414.6) = 17 46 21.35 -28 44 10.7 Extent = 20.8 (20.8-41.7)", rotation angle = 0 Source counts = 364.0 +/- 33.9 Background counts = 787.1 Rate = 0.02 +/- 0.001 [Sat Aug 11 09:21:16 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 09:21:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 09:21:16 2012] Assessing source extent using major axis lower bound [Sat Aug 11 09:21:16 2012] Source does appear to be extended [Sat Aug 11 09:21:16 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 10:53:49 2012] XMMSAS src. selection expression = ellipse(28140.034000, 36020.220000, 1250.580036, 1250.580036, 0.000000, X, Y) [Sat Aug 11 10:53:49 2012] Writing source region out to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_src.reg [Sat Aug 11 10:53:49 2012] Extracting stamp from image fullrun_mos1_xmm0112970501_pi300-10000_cl_sm2.00.img.gz, (252, 343) - (396, 486) [Sat Aug 11 10:53:49 2012] XMMSAS bgd. selection expression = annulus(28140.034000, 36020.220000, 2084.300060, 4168.600120, X, Y) && !ellipse(28618.000000, 35109.551941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30123.199829, 35349.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26493.357941, 36319.902802, 870.000000, 870.000000, 0.000000, X, Y) [Sat Aug 11 10:53:49 2012] Writing fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2.gif [Sat Aug 11 10:54:00 2012] Mean detx,y = (8989.07, 1554.24) [Sat Aug 11 10:54:03 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 11 10:54:56 2012] Binned source spectrum to 10 counts/bin [Sat Aug 11 10:54:57 2012] Setting source spectrum file to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Aug 11 10:54:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat Aug 11 13:29:00 2012] Updating aperture counts using extracted products [Sat Aug 11 13:29:00 2012] Error reading totcts from fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat Aug 11 13:29:01 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 11 13:29:01 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2.arf [Sat Aug 11 13:29:01 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 11 13:29:01 2012] Updating source flux to 2e-13 [Sat Aug 11 13:29:06 2012] Flag c found in src. 2 procflags, skipping spectral fitting [Sat Aug 11 13:35:35 2012] Reading fit data from xmm0112970501/analysis//spectral/fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_pl.csv [Sat Aug 11 13:35:35 2012] Spectral fit parameter nH value = 2.30784e+23 [Sat Aug 11 13:35:35 2012] Spectral fit parameter PhoIndex value = 2.14229 [Sat Aug 11 13:35:35 2012] Failed to get F(0.3-8.0) from xmm0112970501/analysis//spectral/fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sat Aug 11 13:35:35 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 11 13:35:35 2012] Using Nh = 2.3e+23, photon index=2.14, rate=0.0152, arf fullrun_mos1_xmm0112970501_pi300-10000_pass1_cl_src2.arf [Sat Aug 11 13:35:35 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 11 13:35:35 2012] Updating source flux to 8e-13