[Mon Jul  9 08:44:16 2012] Detection parameters:
  Position = (294.8, 261.8) = 17 46 15.12 -28 42 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 17.8
  Background counts = 77.1
  Rate = 0.003 +/- 0.0007

[Mon Jul  9 08:44:16 2012] Off-axis axis estimate = 2.67'
[Mon Jul  9 11:58:52 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 11:58:52 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Mon Jul  9 11:58:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.958
[Mon Jul  9 11:58:52 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.76"
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16.csv
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16.csv
[Mon Jul  9 13:11:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jul  9 13:11:43 2012] Fit fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jul  9 13:12:12 2012] Spatial fit model total counts = 1227.010000, observed total counts = 1225.000000
[Mon Jul  9 13:12:12 2012] Offset between fit and detection position for source 9 = 8.799829 pixels
[Mon Jul  9 13:12:12 2012] 1189.670000 total counts/ 1016.920000 bgd. counts: snr = 5.417197
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.799829 pixels
  Position = (287.9, 256.3) = 17 46 17.41 -28 43 9.1
  Extent = 15.5 (15.5-31.1)", rotation angle = 0
  Source counts = 172.8 +/- 34.5
  Background counts = 1016.9
  Rate = 0.007 +/- 0.001
[Mon Jul  9 13:12:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:12:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:12:12 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 13:12:12 2012] Source does appear to be extended
[Mon Jul  9 13:12:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 17:49:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 17:49:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 17:49:36 2012] Initial guess for spatial extent in simple fitting = 15.53"
[Mon Jul  9 17:49:36 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.966
[Mon Jul  9 17:49:36 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.53"
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12.csv
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12.csv
[Mon Jul  9 18:41:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul  9 18:41:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 18:41:27 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 16.269309 pixels away
[Mon Jul  9 18:41:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 18:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 18:41:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 18:41:27 2012] Source does appear to be extended
[Mon Jul  9 18:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 19:51:40 2012] XMMSAS src. selection expression = ellipse(24995.398000, 22252.084000, 931.656027, 931.656027, 0.000000, X, Y)
[Mon Jul  9 19:51:40 2012] Writing source region out to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9_src.reg
[Mon Jul  9 19:51:40 2012] Extracting stamp from image fullrun_mos2_xmm0112970401_pi300-10000_cl_sm2.00.img.gz, (234, 203) - (341, 310)
[Mon Jul  9 19:51:40 2012] XMMSAS bgd. selection expression = annulus(24995.398000, 22252.084000, 1552.760045, 3105.520089, X, Y) && !ellipse(24028.105600, 21564.068200, 1658.440848, 1658.440848, 0.000000, X, Y) && !ellipse(24038.249695, 20323.181366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.560486, 20283.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23506.274750, 20267.500092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.434357, 21370.435104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25898.920776, 21293.991501, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 19:51:40 2012] Writing fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9.gif
[Mon Jul  9 19:58:15 2012] Mean detx,y = (2640.68, -5473.93) 
[Mon Jul  9 19:58:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 19:58:33 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 19:58:33 2012] Setting source spectrum file to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul  9 19:58:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jul  9 20:18:30 2012] Updating aperture counts using extracted products
[Mon Jul  9 20:18:30 2012] Error reading totcts from fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul  9 20:18:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 20:18:30 2012] Using photon index=1.80, rate=0.00659, arf fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src9.arf
[Mon Jul  9 20:18:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 20:18:30 2012] Updating source flux to 7.8e-14